Your cart is empty.
Your cart is empty. Feature:
Display device is 4-digit yang red digital tube.
Digital tube 8-level grayscale adjustable.
The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.
4pcs M2 screw holes for easy installation, hole diameter is 2.2mm.
Parameter:
Working Voltage: 3.3V / 5v DC
Working Current: 30 / 80MA
LED Display: 0.36 inch
Color: Red
Size: 42 x 24 x 11mm / 1.65 x 0.94 x 0.43 inch
Connect method:
GND—ground (GND)
VCC--power supply (3.3V to 5V)
DIO--data input and output (D2)
CLK--clock signal pin (D3)
Package Included:
3 x TM1637 4-digit 0.36in LED digital display Module Digital Tube Display Module
Customer
Reviewed in the United States on August 29, 2024
The TM1637 is a standard part supported by Arduino and other embedded development platforms, and is I2C bus which makes it ideal for small embedded CPU boards with limited I/O. I paired mine with an ESP01 for testing, about as minimal a board as you can get, and it worked great. However, these days I find simple 7-segment displays far too limiting. I frequently use OLED 12864 boards that are also I2C, smaller in board footprint, and 128x64 pixel so they are far more flexible, and at only a little more cost. With the Arduino libraries, they are just as easy to program, too. The 7-segment displays are a little brighter, however, so if your goal is a simple timer or clock display you might be better off with the TM1637. Anyway, these parts from Ferwooh are reasonably well made, bright and clear, and have good mounting screw holes. I’m not as pleased that the header pins are side mounted in retrospect; it makes it harder to design an enclosure than a rear facing header would have been. That is pretty normal for the part type though. I will note that the product picture shows a screen printed blue PCB with labels that look like the equivalent Grove part from Seeed Studio, but what shipped was blank green PCBs.
dumgoat
Reviewed in the United States on June 24, 2024
These 7 segment 4 digit displays from Ferwooh are easy to use and work well with our Arduino projects. The bundle includes three TM1637 screens.We use the TM1637Display.h library which meets all of our needs. At such a reasonable price, I would definitely recommend them.
Recommended Products
$27.52
$ 11 .99 $11.99