Your cart is empty.
Your cart is empty.
Details
Extended Lever: The extended lever (13.89in) provides extra leverage so you can control it quickly and get the right tension or release.
Forward and Reverse Switch: A forward and reverse switch at the ratchet mechanism controls the tightening and loosening work of the chain binder.
Application
It is suitable for securing heavy loads on trailers, trailers, and flatbeds with transport chains and can be matched with your 3/8 inch to 1/2 inch chain, suitable for most industrial applications such as factories, buildings, warehouses, garages, docks, port transportation, bridge construction, lifting, handling.
Specifications
Material: 45# Steel
Color: Red
Hook Rating: G70
Process: Heat-treated, Plastic Spraying
Compatible Chain Size: 3/8''-1/2''/10-13 mm
Length of Handle: 35.5cm/14in
Adjustable Length: 61.3-81.6cm/24-32in
Packing Size: 40*41*9cm/15.74*16.14*3.54in
Gross Weight: 20kg/44.09lbs
Net Weight: 19kg/41.88lbs
Working Capacity: 4173kg/9,200 lbs
Breaking Strength: 14968kg/33,000 lbs
Package Included
4* Chain Binders
Notes
1.Make preparations: determine the weight and center of gravity of the object to be lifted and mark the lifting and weight data. Only after the center of gravity is determined can the hook be hung in the proper position.
2.The crane operator should be informed of the weight of the object to be lifted.
3.The crane hook should be hung vertically above the center of gravity of the object to be lifted.
4.The lifting object is to be lifted in such a way as to avoid damage to the lifting object, damage to the rigging itself, rotation, or dropping. The following conditions need to be observed to ensure safe lifting.
4.1 For single-leg rigging, the lifting point should be vertically above the center of gravity of the object being lifted.
4.2 In the case of double-legged rigging, the lifting point should be located on both sides of the lifting object, with the lifting point above the center of gravity.
4.3 In the case of three-legged and four-legged rigging, the lifting point should be evenly located at the level of the center of gravity of the lifted object and above the center of gravity of the object to be lifted.
5.This product is not designed or approved for high-altitude hoisting, but only for binding and tightening
$55.99
$ 24 .99 $24.99