Your cart is empty.
Your cart is empty.Z-Limit Quill clamp holder features manufactured and inspected at world Class factory that produces highest quality European brands. Fits Bridgeport Type milling machines. Fits milling machines with 1-7/8 inch dia. Quills. Clamps directly onto machine Quill. Will not Disturb working tool in the machine.
Elizabeth Calfee
Reviewed in the United States on August 14, 2022
Just came in the mail and I used it to set my milling vise parallel on a JMD-15 mill drill table with a dial indicator. It came with wavy washers installed at each adjustment screw and had no issue with holding steady with reasonable torque on the adjusting nuts. Evidently they fixed this issue raised in previous reviews. See attached pic.Good value, nice import tool for a hobby machine.
Nick C.
Reviewed in the United States on March 17, 2022
As the other review stated, Out of the box these require an excessive amount of force to lock in place.Instead of wave washers, I recommend split lock washers, the shafts are M6.I had a few on hand and tried them out and it makes the arms lock down tight.I got a pack of 500 for $13.00 also on Amazon, overkill for the amount I need to fix this but I'll use them for other projects.Also, Be aware that out of the box this will only hold the smaller of the typical dial test indicator pin sizes.The arm is reversible to hold the bigger, but the shaft that holds the last "arm" is too large to fit in the small holder to reverse it.Again, This is a somewhat easy fix, The shaft that's too large is held in place by an M3 set screw.It wouldn't be hard to turn one down on a lathe or get a metal dowel pin that is a better fit.All in all, If you want an out of the box solution. This isn't it.But since it's half the price of other brands I saw, the price to fix the minor issues is still a win in the end.Up to you to weigh your options, I'm content with this purchase.
Dr. McGold
Reviewed in the United States on October 30, 2018
No wavy washers, takes way to much force to clamp down on the joints to get it to not move. Has so little force on the clamps indicators will let the joints slip.
Recommended Products
