Your cart is empty.
Your cart is empty.Product Description
About the product process introduction
- The interior of the product is shaped by composite materials, which has the advantages of high strength, wear resistance and light weight.
- The exterior is covered by real carbon fiber woven fabric.
- The surface is UV-painted and polished, and has strong anti-oxidation and anti-wear ability.
Difficulties in the production of products
- The hard process has the highest dimensional accuracy requirements, and the production process is prone to deviations.
- The carbon fiber product is made of carbon fiber woven fabric, and the carbon fiber woven fabric must be neatly tidy.
Installation: no drilling
- Pull out the leather dustproof cover, turn the inside out and clip the strip.
- First remove the original handbrake cover then the dustproof cover.
- Mount the replacement into the dustproof cover and fix with a new strip.
- Put the replacment and dustproof cover back on the lever and tighten the strip.
- Clip the extra strip and restore the dustproof cover.
Max
Reviewed in the United States on July 31, 2024
Not difficult if you have some tools, needed one size tool for the entire job, took me around 30 mins for the entire project and fits perfectly.
Josh
Reviewed in the United States on May 5, 2024
If you have to use a dremel or something to make the hole bigger… then it’s a waste of money
Dennis K. Kitchings
Reviewed in the United States on March 21, 2023
The carbon fiber looks really good. It is the same shape as the original handle. I was worried about it being too rigid to go over the metal tab that holds the handle on, but it did great considering that I had to remove it and install it several times. The hole at the front where the release button comes through was too tight on mine. I had to use a Demel tool to take a good bit off the inside of the new handle for it to fit correctly. If you have to do this, I recommend testing the fit to the button with the handle turned backwards instead of sliding the whole handle in the correct way because the fit for the body is tight as well. Once I got it where my button moved freely in the hole, I reinstalled the handle turned the right way and it works just fine.
Jared Grant
Reviewed in the United States on December 6, 2023
👍
Zander13
Reviewed in the United States on August 4, 2021
Perfect OEM fit. Super easy install
Shadowglockou812
Reviewed in the United States on March 3, 2021
Looks great and super easy to install if you can manage to remove 4 screw's and pop off the top of the console and remove 2 screw's then it's a 10 minute job.
Christopher F.
Reviewed in the United States on July 8, 2020
Good carbon fiber quality. but only came with the handle part no tool to install with like on the picture.
Mrs. G
Reviewed in the United States on December 31, 2019
Looks like a very nice piece, however it's not easy to install. You have to strip everything under your console. Unfortunately it's not something I want to get into and chance messing my car up. I'm returning it.
Recommended Products