Shopping Cart

Your cart is empty.

Your cart is empty.

anidees Graphic Card Cooler 3 x 80mm PWM Fan, Support Aura SYNC/Mystic Sync/Aura RGB/RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL

Free shipping on orders over $29.99

$22.99

$ 10 .99 $10.99

In Stock

About this item

  • Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans; Sturdy Metal with aluminum brush with PCI mount design for easy installation, fit PCI-E x1/x16
  • 80 mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
  • Easy to use: the fan allows you to control the fan speed and LED mode by remote control manually, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin addressable Aura Sync, Mystic Light Sync (J-Rainbow) and addressable RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
  • PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow. Product dimension L 12.48 inches x W 5.12 inches x H 1.97 inches
  • RF Remote control : allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.



Product Description

11

1

PWM Control

Dynamic speed adjustment, minimizing noise or maximizing airflow.

2

Vertical Mode

Cooling down Graphic card directly

3

Parallel Mode

Cooling down Graphic card directly

(Fit PCIe x1/x16)

4

RGB Lighting Effect

Support ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0

6

Color Mode

12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.

5

Support 5V 3pin addressable Header

Please note: It does not support 12V 4 pin RGB header.


Roberto Carlos Barriga Granados
Reviewed in Mexico on October 4, 2023
Es justo como se ve en la publicidad y de inmediato se nota su excelente calidad
Midian
Reviewed in the United States on June 11, 2022
Pros:- Fans are very quiet and push a decent amount of air. Has 3 manual modes or can be controlled by 4 pin PWM.- RGB has a great color range. Can be controlled by a manual mode with a remote. Also has a wide variety of color presets or you can run ARGB with the use of the 3 pin connector.- Build quality actually far better than expected. Does not feel like cheap plastic, has a pci post that is coated, and uses a metal back plate.- VERY easy to install.Cons:- Uses external SATA power.- Cable placement.- Does not really cool my Nvidia RTX 2080 ti FE but maybe by 2-3 degrees. (Possibly due to my chosen placement.)- Manual RGB mode only has 3 static colors Red/Green/Blue but tons of animated modes.- Bit pricey for what you get in my opinion.Overall I still recommend this even if for the aesthetics in my case.Update 12/21/22: Still running strong & no issues. I upgraded to a MSI 3080 ti and due to it's bulky shape I changed the placement. Still cools the same and still looks spectacular.
RFM
Reviewed in the United States on May 11, 2022
Got this for our customer that was having problems keeping his overclocked 3090 board running without being throttled while he was "playing" games. I highlighted playing because this fellow takes his games very seriously and enters all the contests or meets (whichever is correct) and from what he says has won quite a few.We didn't build this unit but somehow he got it from Dell as a gratuity. Its is the latest Dell R12 and the way it is setup you can only have 1 - 3090 due to space issues. Dell, like most of the other consumer assemblers, tries to use the smallest case, motherboard, etc. to maximize their profits. So there is little room for any kind of cooling, however the CPU does have liquid cooling and we recommended the card should have the same.Anyway this cooler fit in between the two slots left because the connector you see coming down is merely a piece of metal and it does not need to connect to the MB by using a PCie slot. It has its own 3 & 4 pin connectors as well as a SATA for power. His temps were in the ±90°C and he felt the GPU was being throttled at those temps. We put the fan card in and had him start using the unit and while the temps only hit the high 60s and low 70s. I offered to build a unit for him for cost but being still in college he needs every penny.Basically we solved his problem for less than $50.00 and 20 minutes time. If you have any problems with heat, or you just want to treat your unit, this board will get you there quickly and economically. It takes two slots and ideally it should go into a PCie slot, but as I said above they don't have to be on the MB slots - just need the ability to fasten it in. It is built solid and not just 3 fans screwed together.
Eric Bergeron
Reviewed in Canada on March 18, 2022
Very easy to install and does cool down like it's supposed to I do recommend this product.
キシラデ
Reviewed in Japan on December 11, 2021
3080で使用てますが-2℃くらいでしょうかあまり効果がありません。本当にお飾り用です。追記装着13日でファンから異音が出るようになりました。スマホがテーブルの上でバイブレーションしてるような音で結構うるさいです。返品も面倒なので捨てます。
Kurt Schefter
Reviewed in the United Kingdom on October 31, 2021
Without the proper RGB connection to my Gigabyte MB this cooler is just noisy. The RGB LEDs are too dim to add any color to the system so... useless.
MSL
Reviewed in the United States on September 8, 2020
The GPU FAN looks good and seems to be well-build. But after less than one month of use, two of three fans starts roaring and vibrating. It looks like very low quality fans are used in this product, probably they do not have even basic ball bearing.Still two days of warranty left, so will try to return the fan back to seller. Would not expect so low quality for $50...
James
Reviewed in the United States on December 5, 2020
Here’s the scoop. These fans do work and will cool your GPU. However they are reasonably noisy. They’re not as loud as much at would say they carry a distinct noise. The problem is that once you go into bios and set these to PWM mode and make the fan noise tolerable, the performance/cooling gain becomes negligible if not barely noticeable.If you want to run them in DC mode they will cool your GPU significantly. I noticed a 5-6c drop. I even got a little extra CPU cooling.I think this cooler would be best served in a closed front panel case, maybe even an ITX case where there is minimal ventilation and better noise cancellation. But if you have a high airflow case with a mesh front panel like mine then they can always be heard no matter how low you set the RPM. It can be tolerable but I plan to eventually pull them out of the case because I just don’t want the noise.
Captain Motorcycle
Reviewed in the United States on November 13, 2020
Really well made and great design. The first one I got had a bad fan, but it was replaced. The confusing part of the item is that "it can be mounted horizontally" but it does not come with anything to do so. I purchased a fan mount for the side of the PCI slots to mount the fan set horizontally. The fans blow very fast and the lighting works very well with MSI's Mystic light. The remote control seems to work well, but I just keep everything on high
Idle Hands
Reviewed in the United States on January 12, 2020
I purchased a computer recently, and opted for a 5700XT by Radeon, and instantly noticed that the GPU runs very hot. I opted to mess with the fan settings with the software, but found that reverts back very frequently, and have had a few crashes that I can correlate to setting changes. This problem with it running hot, causes the GPU to throttle back and compromise the performance when I would hit about 77-78C. I opted for this fan to see if it could correct the issue until AMD was able to rectify their software and correct the fan settings.I will say, this fan has cooled my GPU between 7-10C both at idle and at load. You couple this with some cool RGB that work nicely with my other lights in the case, and I'm pretty happy. I read others having problems with the installation, but I have a large case, and I had no issues with the install, nor the hooking it up and making it work.Would recommend to anyone that struggles with elevated temps on their GPU, as this will help with the longevity of the card to run at cooler temps.
Ich
Reviewed in Germany on November 10, 2019
Sehr guter Grafikkarten Kühler!Ich habe mir von Anidees diesen Grafikkarten Kühler gekauft, um bei meinem Gehäuße den Airflow für meine Grafikkarte zu verbessern.Zum Kühler an sich, dieser ist sehr Hochwertig aus Metall verarbeitet, und macht einen guten Eindruck.Der Vorteil an diesem GPU Kühler ist, dass man diesen noch zusätzlich über Asus Aura ( Gigabyte Fusion o. Mystic Light) ansteuern kann von der RGB Beleuchtung her. Damit habe ich bei mir nun alles passend einstellen können mit meinen Ram, anderen RGB Fans und den GPU Kühler hier.Es gibt auch die Möglichkeit die Beleuchtung oder die Lüftergeschwindigkeit über die mitgelieferte Fernbedienung zu steuern.Bringt der Grafikkarten Kühler auch was?Ja!im Schnitt habe ich ca. 3-5 Grad kühlere Temps mit diesen Kühler.Ich habe das ganze u.a in Furmark getestet. Auch beim Zocken springen die Lüfter meiner Grafikkarte erst später an.Lautstärke:Auch auf der höchsten Einstellung ist der GPU Kühler so gut wie fast nicht wahrzunehmen!Was mir Persönlich auch sehr Wichtig ist.Fazit.Super GPU Kühler der Sehr Leise ist, und eine schöne RGB Beleuchtung bietet welche man über das MB wunderbar steuern kann.Von mir eine ganz Klare Kaufempfehlung!!!
Recommended Products