Your cart is empty.
Your cart is empty.Auto Meter 15020 Gauge Works Triple Dash Pod
FrankGallagher
Reviewed in the United States on December 30, 2023
Ordered this from Amazon for my Isspro Performax gauges, got it in two days with the Ram taupe color match interior paint. Get everything, open the box and it’s missing the bracket. I call them and they said to send an email and they’d mail it. I emailed them as they told me to and they reapplied a day later requesting my receipt. I sent it. They replied that afternoon that they shipped the bracket and I should receive it within a couple weeks - they shipped snail mail so there was no tracking. So much for 2 day shipping. 1.5 weeks later, it arrives via USPS.This gave time for the paint to cure on the gauge pod. I go to pull my dash cover and, being 20 years old, it came out in shards. Ordered an LMC truck replacement. Another week later, I had everything. I measure, drill and install. I then test for fitment to find the gauges hit the screws that come into the bracket vertically from the dash cover. I pull it all apart, trim the bolts, put it all back together and I’m thrilled. Balancing the tightness of all the bolts allows everything to seat perfectly. I’m very happy with the fitment and the gauge placement is perfect; way better than my old over mirror setup!
Morgan
Reviewed in Canada on May 13, 2021
Product is flimsy plastic not worth the price paid, looks fine in the truck but was not shipped with any of the correct install hardware so I will need to fabricate something. Would have ordered the pillar mount if I knew this.
Joe Schmoe
Reviewed in the United States on March 20, 2018
So much wrong with this item, where to begin...First thing is the supplied bracket is too wide for the pod, it pushes out the edges of the pod putting undo stress on the plastic which would eventually lead to failure. The sides of the bracket that mount to the pod are about 3/8" too short. I tried to solve this by spacing the bracket with washers so it'd be the right height so the holes would line up with the pod. This causes the left and right gauges to hit the bracket and therefore cannot mount the pod. The bracket needs to sit flush with the dash so all this makes the bracket useless so I had to fashion my own bracket.The right side gauge opening is too close to the outside wall of the pod. I had to sand down the inside wall so that I could screw on the gauge fastener which secures the gauge to the pod.Lastly, the underside of the top of the pod is also too close to the pod opening for the center pod. I was unable to screw on the gauge fastener which secures the gauge to the pod until I sanded it down as well.I mean seriously if I'm paying $60.00 for a small piece of plastic and a small piece of steel I should not have to fabricate my own bracket and do all the other work to get it to fit. Wouldn't be so bad if it was $10.I did get it to fit, painted it and it looks good.
Billy N.
Reviewed in the United States on June 6, 2017
Should have ordered this the first go-around. The others that list as fitting our particular application did not fit as advertised. Save yourself some time and get this one!
PdP
Reviewed in the United States on August 11, 2016
ok, definitely picture is wrong but part # matches auto meter so got the correct item just use other web sources for references.smaller than anticipated but does fit correctly and pretty simple to install.3 stars for being a little on the small side that being the overall width. Also black color does exactly match my 2002 3rd gen qc interior black but i can deal with that.
Michael
Reviewed in the United States on January 27, 2016
The gauge pod illustrated is NOT the one they have shown. Shipped part is incorrect and will likely continue till someone updates the image.
Recommended Products