Your cart is empty.
Your cart is empty.
They can be nicely printed in polymer clay jewelry and are designed for reusable with gentle care.
Below are instruction tips on how to use your silk screen:
1. Prepare the following kits for your work area: Polymer Clay, Acrylic Paint, Silk Screen, Squeegee, a bowl of cold water, and cutters.
2. Roll out a sheet of clay and place the silk screen with the Logo up in the clay, burnish it down to guarantee there are no air bubbles.
3. Use a squeegee to make the silk screen flat and smooth.
4. Squirt some paint at the top of your design from edge to edge.
5. Use the squeegee at a 45-degree angle to drag the paint across the screen evenly.
6. Pull the silk screen while the paint is still wet.
7. Immediately put the silk screen into a bowl of cold water while the paint is still wet. Gently rinse the silk screen to get rid of all paint.
8. Use a paper towel to get rid of any excess water and leave it on the table for drying.
9. Allow the paint to dry on your clay and then you can cut shapes with your cutters
TIPS:
1. To avoid breaking your silk screen, gently rinse it as soon as finish painting.
2. Avoid oil-based paints, I recommend good quality, high pigment acrylic paint, which is not too thick but not very watery either.
3. Maybe a slightly sticky feeling on the screen after you wash it, it is a normal process and it will not get any impact on your further use.
