Your cart is empty.
Your cart is empty.
Application
- It is suitable for distillation, fractionation, separation, extraction, purification, and synthesis at home, schools, laboratories, research centers, and other places.
How to Extract Rose Dew
- 1. Prepare 100 g/0.22lbs of rose petals and 200 ml/6.76 oz of water (if you want to extract a thicker dew, you can add less water and more petals), then put them in a container, add a little salt and mix well.
- 2. Use a match (not included) to light the alcohol lamp and wait a few minutes (the alcohol lamp heats up slower) for the water to boil and the rose petals to lighten in color.
- 3. The steam after distillation into the condenser tube tailpipe out, pure dew production success.
Specification
- Material: High Borosilicate Glass, Iron
- Process: Spray Paint
- Color: Clear
- Style: Modern
- Plug Type: US Standard
- Assembly Required: Yes
- Number of Essential Oil Bottles: 2
- Number of Cotton Wicks: 10
- Number of Beakers: 2
- Heater Power: 1000W
- Heater Voltage: 110V
- Flask Heat Resistance: About 300℃/572℉
- Distillation Flask Capacity: 1000ml/ 33.82oz
- Erlenmeyer Flask Capacity: 250ml/ 8.45oz
- Large Beaker Capacity: 250ml/ 8.45oz
- Small Beaker Capacity: 100ml/ 3.38oz
- Gross Weight: 8.5kg/ 18.74 lbs
- Package Size: 56*46*33.5 cm/ 22.05*18.11*13.19in
Package Included
- 1* Distillation Flask
- 1* Pear Shape Separatory Funnel
- 1* Condenser Tube
- 1* Lifting Table
- 1* Heater
- 1* Alcohol Lamp
- 1* Glass Dropper
- 2* Beakers
- 1* Beaker Brush
- 1* Iron Stand
- 1* Erlenmeyer Flask
- 1* Asbestos Net
- 1* Latex Tube
- 10* Cotton Wicks
- 1* Rubber Stopper
- 1* Thermometer
- 2* Essential Oil Bottles
- 1Pair* Gloves
- All Accessories for Installation
Notes
- 1. Before use, please fix the base nut of the iron frame table, adjust the position of the cross-frame table and iron clamp, and connect the distillation flask with the condensation tube.
- 2. Please note that the position of the sink should be higher than the plane of the condenser tube, and fill the inside of the condenser tube with water from the inlet pipe with a syringe of about 30ml/1.01oz.
- 3. Connect the latex tube and loosen the stop clamp of the outlet of latex tube, the water will flow out automatically (siphon phenomenon principle).
- 4. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Recommended Products