Your cart is empty.
Your cart is empty. 1. Suitable for Various Motors: USB programming cable is designed specifically for CAN protocol motors, including the M400/G330 (CAN), M500/G520, M510/G522, M600/G521, M620/G510 (CAN), M420/G332, M800/G530, and more. It ensures seamless compatibility and performance.
2. Wheel Diameter Setting: The cable allows you to set your wheel diameter and release the speed limit effortlessly. If your motor current settings aren't meeting your needs, this cable provides the solution.
3. Easy Connection: Simply connect the motor, turn on the power, attach the cable to the motor and display and plug the USB end into your computer or screen. The user friendly design of this programming cable ensures easy setup and use.
4. Fixes Incorrect Displayed Speed: Are you frustrated with erroneous speed readings on your display due to mismatched wheel diameter settings on your motor? With this USB programming cable, you can correct these discrepancies, bringing back accurate data readings.
5. Supports Various Wheel Diameters: The programming cable button enables you to set a wide range of wheel diameters, including 29 inches, 27.5 inches, 26 inches, and 20 inches. This flexibility lets you tailor your bike settings to your specific needs, improving performance and ensuring a smoothly ride.
Specification:
Item Type: USB Programming Cable
Product Material: Copper + PVC
Compatible with for mid motor M400/G330 (CAN), M500/G520, M510/G522, M600/G521, M620/G510 (CAN), M420/G332, M800/G530, and motors with a 5 pin triangle plug. The product can be used to change the speed limit and set the wheel diameter.
How to Use:
Introduction and of programming line buttons:
1. Press 1 time in a row: wheel diameter 29 inches 60KM/H ‑2330mm
2. Press 2 times in a row: wheel diameter 27.5 inches 60KM/H ‑2240mm
3. Press 3 times in a row: wheel diameter 26 inches 60KM/H ‑2100mm
4. Press 4 times in a row: wheel diameter 20 inches 60KM/H ‑1550mm
5. Press 5 times in a row: wheel diameter 27.5 inches 25KM/H ‑2240mm
Introduction:
1. Connect the motor and power on
2. Connect the motor to the main line of the instrument
3. Connect the interfaces at both ends of the programming cable to the motor and the display screen respectively
4. Connect the USB plug of the programming cable to the USB interface of the computer or display screen
5. The programming line indicator lights up to indicate that the connection is successful.
If there is a 25 fault after connecting, just press the module button to return to normal. For some , when the wheel diameter setting is switched, the wheel diameter size of the display screen does not change. At this time, you need to exit the setting and return to the main page of the display screen to re enter the setting. Then you can see the wheel diameter you set.
packing list:
1 x USB Programming Cable
1 x Storage Box
