Your cart is empty.
Your cart is empty.Product Description
Lights up the retail gondola shelving
Specification of the products and after sold terms
Retail Store Using This Gondola shelving lighting fixture for Super Market, Retail store, Liquor or Snack Store, Gasoline Station Store, Fast moving merchandiser, Bakery, Wall shelving system, Gondola shelves, Shelf flat, Under cabinet, etc.
This gondola shelving lights kit includes total 18pcs parts:
8 PCS Aluminum profile bar which makes of LEDs,36"width size and 48" width size available, all with 600mm Length wire connector .
1 Set 50W( for 36"width size) or 80W(for 48"width size) Mean-well Brand transformer(UL listed) kit,
4 PCS 500mm length ultra thin Power Tracks(Total 2meters length suits for 74" height gondola easily),
2 PCS Power Track Connectors,
1 PCS DC output connector with 1000mm length wire,
1 PCS Double PT19 connector with 500mm length wire,
50000 hours Lifetime This led shop lights gondola shelving lighting fixture has over 50,000 hours lifetime safely in using, Stock in California US, drop and ship the new item to replace free in validity period .
Before and After the gondola shelving lighting
Before
Make a demo to light up one shelving to see result at first.
After
Lights up one section gondola shelving so that the cosmetic looks organized and sells fast.
Lights up the grocery shelving
Lights up merchandases (like candy) on the shelving so that sells fast to avoid out of the period of validity.
How to install the gondola shelving lighting fixture?
Step 1:Inside the power track to the gab between the shelves and back panel of gondola
Don't remove the adhesive before make sure the position to stick the Power Track
Step 2:The top shelf doesn't need to light up normally, so the power track should be set below the top shelf.
It is not necessary to disassemble the shelves when fit the power track.
Step 3: If lights up more than 74"height gondola, the power track needs to extend via connector or double PT19
This image is only for reference how to extend the length of Power Track.
Step 4:When the PT19 connector from LED bar matches the power track ,it should be turned 90 angle so that snapping to powertrack steadily and safety in running.
All the PT19 connectors came from LED Bar should be the same direction on the Power Track
There are 2 ways to install the Power Track
Step 5:LED light bar under the shelving via strong magnets
The LED Bar under the shelving via magnets hidden wires so that everything looks organized.
Step 6:The one way is to stick on the back panel of gondola
After fitted all, connect the transformer and make sure all connecting correctly before turn on the power switch.
The second way is to stick on the side of upright of gondola
This way is very easier, but the wires will appear.
Reference fitted Image
One gondola shelving lighting kit including all the connectors, Plug and Play,No required electrician.
How to extend powering up by one AC outlet in retail shop?
In many cases, there are limited outlets in retail stores then how to extend powering up the gondola lighting fixtures? Solution available here!
Using C7C8 Extension cable Kit (ASIN:B0CH3MYNBG) can power up 5pcs sections gondola shelving by 1 AC outlet.
$39.99
$ 17 .99 $17.99