Your cart is empty.
Your cart is empty.
Notes
1. Please check the size carefully before ordering.
2. The normal operating oil temperature of this product is 68-140℉, and the maximum system operating temperature is 194℉ (not more than 1 hour).
3. Filter filtration accuracy is 10-30 microns, and it is better to add a magnetic block at the bottom of the oil tank to stop metal chips from entering the system.
4. Please select the appropriate hydraulic oil according to the actual operation and ambient temperature. The oil viscosity at 104°F is 42-74mm²/s.
5. When used in series or parallel, the external drain must be used for pressure relief if the back pressure exceeds 10MPa (the rotating speed is lower than 200rpm). It is better to connect the external drain directly with the oil tank.
6. To ensure a long service life of the motor, it should be operated at 30% of the rated pressure for about 1 hour before adding load to the motor. Before adding load to the motor under any circumstances, ensure that the motor is filled with oil.
Specifications
Color: Black
Material: Cast Iron, Low Carbon Alloy Steel
OEM Part Number: 101-1015-009
Assembly Required: No
Process: Spray Paint, High-temperature Quenching, Carbonitriding, Cyaniding
Rated Flow: 55L/14.53gal/min
Rated Displacement: 300cc
Rated Power: 9KW
Rated Torque: 360N·m
Rated Speed: 165RPM
Rated Pressure: 8.5Mpa
Maximum Working Differential Pressure: 8.5Mpa
Shaft Diameter: 25.4mm/1in
Oil Port Diameter: 7/8-14unf
Product Size: 8.53*8.53*18.7cm/3.36*3.36*7.36in
Package Size: 26*13*13cm/10.24*5.12*5.12lbs
Gross Weight: 9.5kg/20.94lbs
Net Weight: 8.1kg/17.86lbs
Package Included
1*Hydraulic Motor
$625.55
$ 99 .00 $99.00