Your cart is empty.
Your cart is empty. Specification:
Model: GA91S2H Fan Dimension (L x W x H): approx. 85mm x 85mm x 10mm
Mounting holes distance: approx. 40mm x 40mm x 40mm (Center to Center)
Power Connector: 4-Pin Header
Application:
Fit for Zotac GTX 1060 AMP! Edition+ 9GB (ZT-P10600G-10M)
Fit for ZOTAC GTX 1070 Mini (ZT-P10700G-10M)
Francis Godmaire
Reviewed in Canada on May 8, 2024
Holes are not exactly the same size and the distance between should be 40mm … they are 39mm so its not perfect fittingIm pretty disapointed, that is the first time i dont receive a perfect fitted fans!!Since the screws are mini , i will have to re-work the holes..
ILikeMovies
Reviewed in the United States on September 14, 2022
Works pretty good, I didn't get to check temps for the old original fans but the new one works good!
Brandon Alexander
Reviewed in the United States on December 27, 2022
Upon removing the fans from my Zotac GTX 1070, In triangular shaped mounting bracket was rounded on all 3 ends, instantly I became suspicious because the fans I receieved in my order, had the same triangluar mounting bracket, only this one, was squared on all 3 ends on the bracket.So, I began the disassembly and mounting of the NEW fans, and to my pleasure the FANS fit just fine, how ever the mounting bracket was too small on the new fans. This made it extremely hard to mount as there is no slack or give in any of the holes, and drilling new holes that close would only further ruin the GPU.So, I mounted both sides with 1 screw each leaving the fans with about 1mm of space before any rubbing...thankfully, I dont see this as an issue, however, it is very concerning having a GPU fan mounted with only 1 screw under heavy load and hoping for a good outcome... Thats just playing with fire.Finally, the wires attached to the new fans are about 2 inches 2 long with so much slack you can barely tuck them in the retainers on the fan shroud. This is actually quite dumb, and the manufacturing process (if there was one) was illogical and badly thought out. When I bent the wires into place to get them to stay, I heard a slight crunch.I have yet to actually mount and plug the GPU into my PC for fear it might fail and cause even more damage.I almost never have issues with any purchases on amazon, so to say I had one with this purchase is kind of surprising.I will not be sending this back for a refund because the box is long gone now, as I didnt anticipate something as simple as a fan to not fit what it was marketed as fitting.This sucks.... 1 star.
Frank L Tetro IV
Reviewed in the United States on September 6, 2021
Fit correctly and work great zotac mini dual fan 1070.you will need to pull the heatsink off to remove the shroud make sure you have thermal paste on hand to reapply. Also if the pads need replacement its a good time to do it.
S. dickson
Reviewed in Canada on September 24, 2021
The fans look like and work like they should but I had to modify the hole pattern to fit my card as the holes did not match up
mthorne
Reviewed in Canada on September 10, 2021
Had to remove and disassemble the cooler, but it wasn't difficult. Works as advertised.
PortCity_MadMan
Reviewed in the United States on November 20, 2021
Obviously if you’re looking at reviews for GPU fans you know what you’re getting in to. GPU cards can be tricky to disassemble, so take your time and watch a YouTube video or two. These fans are a like-for-like replacements, and install for me a breeze! While I had my GPU apart I also reapplied thermal paste to processor.
John W.
Reviewed in the United States on October 31, 2021
It's a direct replacement and easy to install. The one star off is for long lead time...ordered Oct 9, shipped from GA Oct 20, received Oct. 25 in CA.
Customer
Reviewed in Canada on October 3, 2021
These are an exact match for the stock fans of my Zotac GTX 1070 Mini graphics card (PN: 288-1N445-030Z8, SKU: ZT-P10700L-10H) even though the product description does not list this graphics card. The only difference being the stickers on the front in the center of the fans.The install was relatively easy, and these fans seem to work just as well and as quietly as when the graphics card was new.
Jeff
Reviewed in Canada on October 23, 2021
I bought these to replace the fans in my friends zotac 2060 And they worked perfectly
Customer
Reviewed in the United States on January 31, 2021
Edit: These fans worked at first but now have failed at 5 months. They couldn't take the 24/7 usage at 70C for coin mining. Might be OK for more casual use.Original review:This review is for InRobert part number GFY09010E12SP. Although it is not listed as such, this is the correct replacement fan set for one version of the Zotac GTX1070 Mini graphics card. This one fits the version that has 42mm distance between the fan mounting holes. (There is another version of the Zotac GTX1070 Mini card that has 40mm fan hole spacing. The fan that fits that version is a different part number (GA91S2H), so measure carefully).The new fan fits perfectly and is working great so far. Time will tell if it lasts longer than the one year of the original. Installation is not difficult for a skilled PC technician, however, it does involve complete disassembly of the card and heat sink. Take great care not to lose any of the tiny screws! You will need new heat sink paste for reassembly.I thank InRobert for making these fans available. Much cheaper than paying hundreds for a new card!
Skipptide
Reviewed in the United States on July 29, 2020
So, yes this does fit the circumference of the cooler for a zotac GTX 1070 mini. BUT big but, screw hole dimensions of the fans is misaligned, I had to install the fans with an adhesive so buyers beware, otherwise fans work great temps are good
Cody Jackson
Reviewed in the United States on June 22, 2020
TL;DR: Drop-in replacement, keep the screws from your old GPU, nice and quiet, ONLY FOR NON-TI 1070 CARDS.You get two fans, bubble wrapped and stacked on each other carefully in a decent cardboard box. It comes with a PWM splitter cable. It will NOT have screws (as the product description says), so be sure to save your old ones.It's easy enough to install, although routing the shrink-wrapped section of the cable to the connector is a little tricky. You will also need to remove the cooler assembly and flip it to remove the screws holding the fan shroud in place. I recommend doing the cooler removal with a warm (as warm as you can tolerate) card to loosen the thermal compound and pads.These fans are extremely quiet and balanced. In fact, it's significantly quieter than the EVGA GTX 1070 SC (ACX 3.0) in my main desktop, which I find odd. I ran gpuburn for an hour and temperatures stabled at 72C and 49% fan speed. Beautiful.Now for the compatibility issues I see in reviews. I have a 1070 Mini, non TI. Both fans are the same size and both fans have squared-off ends on the 3 mounting tabs.If you have fans where one is slightly larger than the other, or the old mounting tabs have half-circle ends, these are NOT the fans for you.Closing thoughts: I ordered this because one of the two fans wobbled (!) enough to hit the shroud. Time will tell if these fans develop the same issues. But so far, they are working fantastically.
Recommended Products
