Your cart is empty.
Your cart is empty.
Details:
Practical Basket: It can be installed below the cutting saw blade, which can help you collect the cut waste and debris and keep your desktop clean.
Ideal Handle: The 5.24-inch long carving handle provides a comfortable grip, and its three-disc chuck has good stability, helping you complete your work better.
Long Power Cord: The approximately 4.92ft power cord allows you to have plenty of disposable lengths, thus reducing the limitation when you use it.
Application:
It is suitable for carving, polishing, and drilling of jade, agate, metal, wood, etc. It is also suitable for manual polishing, grinding, and cutting of beads, bodhi, and various DIY materials.
Specifications:
Power: 750W
Voltage: 110V
Speed: 0-10000rpm
Blade Size: 15cm/6in
Color: White, Yellow, Blue
Style: Angled
Plug: US-Standard
Material: Aluminum, Copper, Nylon, Steel, Rubber
Surface Treatment: Plastic Spraying
Flexible Shaft Clamp Size: 4mm/0.157in
Drill Chuck Range: 1.5-10mm/0.06-0.4in
Cutting Depth: 0-10mm/0-0.39in
Power Cord Length: About 1.5m/4.92ft
Installation Required: Yes
Number of Items: 1
Gross Weight: 6kg/13.2lbs
Net Weight: 5.5kg/12.1lbs
Table Size(L*W): 26.5*22cm/10.43*8.66in
Product Size: 29*22*23.5cm/11.4*8.66*9.25in
Package Size: 36*29*23cm/14.17*11.41*9.05in
Package Included:
1*Table Grinder
1*Goggles
1*Angle Ruler
1*Basket
1*Flexible Shaft
1*Flexible Shaft Handle
1*Drill Bit Clamp
2*Saw Blades
5*Grinding Heads
1*English Manual
All Accessories for Assembly
Notes:
1. Please note this tool should be grounded while in use.
2. Please always wear proper eye and face protection devices such as safety glasses and face shields(not included).
3. Before use, please check each attachment for cracks or defects, and do not use any damaged, loose, vibrating or unbalanced accessories, or any attachments that are higher than the maximum rated speed of the machine.
4. Please always insert the shank or arbor of an accessory or mandrel into the collect(or collet holder chuck or chuck arbor) as far as possible to provide proper support. Please tighten the collet or chuck securely.
5. Please do not use excessive side pressures which may tend to bend or break the shank or arbor or an accessory. Let the speed of the accessory do the work.
6. Please do not install the motor by jamming or using excessive pressure on the polishing wheel, buff, wheel, or other accessories. This can result in damage to the motor.
7. Please do not operate your power tool during a perceptible power decreases. Please turn the power tool off and do not use it until power is fully restored.
8. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
