Your cart is empty.
Your cart is empty.
Introduction
LS252C is an all-in-one hardness tester with a compact size for hardness measurements on various metal materials.
Featuring a C-shaped impact device with low impact force, it is suitable for testing the hardness of surface hardening layers and parts with small masses or thin thicknesses.
The instrument uses advanced dual coil technology for good repeatability and high measurement accuracy.
The probe has a built-in orientation sensor, which automatically compensates for measurement errors in different impact directions.
The system has five hardness scales, which can be interchanged between Richter (HL), Vickers (HV), Brinell (HB), Shore (HS) and Rockwell (HRC) to avoid tedious manual calculations.
Application
The instrument uses a impact device C with many metal materials choices for wide applications.
Specification
Probe Impact device C
Hardness Scales HL, HV, HB, HS, HRC
Measurement Range HLC: (170-960); HV(80-996); HB(80-683); HRC(20-69.5); HS(31.9-102.3);
Resolution 1HL
Accuracy ±12 HL, ±6 HL typical
Repeatability 6HL
Display 128 * 64 dot matrix OLED
Power Supply Rechargeable lithium battery 3.7V@250mAh, full charge for over 5000 continuous measurements
Charging Port USB(Type-C)
Size 140*34*24 mm
Weight 66g
Working Temperature Range -10~50℃，0~85%RH（no condensation）
Storage Temperature Range -10~60℃，0~85%RH（no condensation）
$428.99
$ 99 .00 $99.00