Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Lee B.
Reviewed in the United States on May 1, 2025
Excellent quality, direct fit, great price, easy to install, noise level is zeroFits for rear sway bar that is 25mm, 2011 MazdaSpeed 3.
Kimberly
Reviewed in the United States on January 28, 2024
While Amazon says it fits a 2008 Mazdaspeed 3, it most definitely does not. This WILL NOT fit the OEM 25mm front sway bar.
Víctor ramirez
Reviewed in Mexico on July 5, 2021
Quedan perfecto mazdaspeed3 2011
Jorge Ivan Medina
Reviewed in Mexico on July 28, 2021
Hay que tener ciudado ya que en las especificaciones de compatibilidad dice que es compatible con el Mazda 3 version estandar, pero no es así, estos son para la versión turbo. Se le podrían poner pero si hay una pequeña diferencia en tamaño y seguramente a la larga cause un problema. Opté mejor por devolverlo.
Robert
Reviewed in the United States on June 23, 2021
Amazon said these would fit a Mazdaspeed 3 but the ID is way too small. I used a sanding drum and polisher on a drill/die grinder and made them the correct Inside diameter and seem to work so far
CoreDawg
Reviewed in the United States on January 11, 2021
The 1st generation Mazdaspeed 3s, and possibly normal Mazda 3s, have an inherent problem with front end clunk over small road imperfections at slow speed. I replaced my struts, top hats, wheels, brakes, sway bar end links, etc, yet the clunk was still there. I narrowed it down to the sway bar not being held tightly by the old sway bar bushings. I put the Moog units on and the sound went away for a month or two, but then came back, although not as loud. It is still there and I am resigned to simply accept it as I think it is more of a design problem with the car rather than worn parts.
Mike rabsich
Reviewed in the United States on April 27, 2021
Fit perfectly and made the clunk in the front end go away made driving enjoyable again
Flavio Ramirez
Reviewed in Mexico on June 5, 2019
muy buena calidad
Krystle ❤️
Reviewed in the United States on June 30, 2019
Didn’t fit my 2012 Mazda 3s hatch 2.5l
Nora Castro
Reviewed in the United States on November 7, 2019
Great Bushing. Fixed my clunking sound and was easy to install. Installed on to 2011 Mazdaspeed 3.
GC
Reviewed in Canada on August 18, 2018
Does not fit a mazdaspeed3. Amazon needs to have a more accurate check for fitment as it does not specifically differentiate between a regular 3 and a ms3. The sway bar sizes are not the same. the MS3 is larger by about 5 mm
Tim Hitch
Reviewed in the United States on December 11, 2018
Fits the Mazda great and took care of the clunking sound
Recommended Products
$16.99
$ 7 .99 $7.99