Your cart is empty.
Your cart is empty.Product Description
The Flange Hexagon Head Rocker Arm Bolts are used to secure the rocker arm and stem seat.
- Compatible with Ford F-250 Super Duty & F-350 Super Duty & F-450 Super Duty & F-550 Super Duty(2008-2010).
- The service life and quality of the engine rocker arm are very important. If there are problems such as aging, damage or wear of the rocker arm, it may cause the engine to work unstable, increase the noise, weaken the power and even cause failure. Therefore, when replacing the rocker arm, the appropriate parts such as bolts should be selected according to the vehicle model and engine model, and ensure that the installation and adjustment are carried out by professional technicians.
Compatible with Fo-rd
F-250 Super Duty 6.4L Diesel Engines (2008-2010).
F-350 Super Duty 6.4L Diesel Engines (2008-2010).
F-450 Super Duty 6.4L Diesel Engines (2008-2010).
F-550 Super Duty 6.4L Diesel Engines (2008-2010).
Material upgrade-35CrMoA
Compared with carbon steel and stainless steel, 35CrMoA has good thermal hardness and other special properties, such as heat resistance, corrosion resistance, wear resistance.
Higher grade bolts
Grade 10.9 Flange Hexagon Head Rocker Arm Bolts with high strength, Tensile, compressive, torsional, and shear resistance, blackened oxidation treatment on the surface, and inherent anti-corrosion properties.
Good design
The head of the rocker arm bolt is composed of two parts: hexagonal head and flange face. The ratio of support area and stress area is larger than that of ordinary hexagonal head bolt, which can withstand higher preload and better relaxation performance.
Easy to install
During the installation, you only need to use tools such as a wrench or wrench socket to tighten the bolt.
Notes:
- Ensure that the length and diameter of the bolt match the connected part.
- Before installing bolts, clean the surface of the connecting parts to ensure that the bolts are properly connected.
- Before using bolts, check whether the bolts and connecting parts are damaged or worn. If so, replace them in time.
- When tightening bolts, use the correct wrench or wrench plug and tighten them according to the correct torque specification.