Your cart is empty.
Your cart is empty.The Performance Tool W85025 Heavy-Duty Rolling Mechanic Seat is the perfect addition to any workshop or garage. The reinforced seat can support up to 350 lbs, making it suitable for a variety of tools and jobs. The 3-drawer tool box with roller bearing slides and two folding tool trays with magnetic pads provide ample storage for tools and equipment. The vinyl padded seat cushion ensures maximum comfort and support for prolonged use. With 2-1/2-Inch polyvinyl chloride full bearing casters, this mechanic seat is portable and allows for easy mobility and smooth movement around the workshop or garage. The rear tray supports screwdrivers and pliers, providing additional storage options for frequently used tools. Stay organized and comfortable during long work sessions with the Performance Tool Heavy-Duty Rolling Mechanic Seat.
Laurie S.
Reviewed in the United States on February 12, 2025
this is sooo handy.
Rachel
Reviewed in the United States on November 11, 2024
I am not a mechanic. I use this as a rolling seat in my office. I have very limited space so everything I buy has to be multi-purpose and a seat doubling as a tool box fit the bill. My only complaint is that it is a few inches too short for my liking but I'm going to see if my husband can replace the seat with something a little thicker eventually. I think it's also worth mentioning to anyone who might use this the same way I do - do not work barefoot around this thing. It is heavy duty and stubbing your whole foot is a terrible experience.Also, if I don't hurry up and buy him his own, I may have to start locking my office to keep my husband from stealing it because he is a mechanic and has tried once already.
techgizlvr_tx
Reviewed in the United States on April 4, 2024
Good: Sturdy construction, well designed.Bad: Instructions, leave out critical information.Ugly: Use of rivets for the enclosed box, difficult to takeout the drawers.Assembly: If the hardware pack(wheels, bolts,nuts, washers) does not fall behind drawers.Loosen the bolts that connect to padded seats.Then install wheels to the side trays.With the wheels installed, position side tray(s), and install support bars, ensuring they overlap under the bottom of the box, not protruding out. If the holes don't lineup, loosen the padded seat!. There are two bolts with slightly different heights. Use the longer ones for the support braces. Shorter ones just for the outer holes in tray. Follow picture after second instruction. Install outer bolts, retighten padded seat bolts.If you are one of the few, where you have the hardware pack falling behind the drawers. Don't try to fish it out! No clearance! Don't waste time, trying to get drawers out!, not easy.First remove all the foam liners out of each drawer!.Place the padded seat on ground, and slide the two bottom drawers(close to wheels) out. Then slide in the bottom most drawer, and quickly put the tool box right way up. Now slide out the bottom drawer to retreive hardware pack!If you are one of the few that has foam liner stuck behind drawers. You need tiny fingers/hand to fish it out.Also, it is a good idea to put squares of doubled sided adhesive tape,to secure foam liners, to prevent them getting struck behind sliding drawers.Enjoy your new Creeper toolbox seat!!!!
Brenda K
Reviewed in the United States on August 6, 2023
The tool drawer was a gift for my son. He loved it! He is using it in his garage making it easy to roll tools out to work on vehicles and roll them back in.
Saif
Reviewed in Saudi Arabia on May 10, 2023
مريح يوفر الطاقة البدنية مما يجعلك تواصل العمل بشكل ممتاز يستحق الشراء
HikerBiker
Reviewed in the United States on October 18, 2022
Everything about this tool box/seat is sturdy. I weigh 100kgs and I don't stress it at all. The drawers move really smoothly, it rolls around well, even on carpet. I'm really glad I bought it to work on my bike with.
Yves Leveille
Reviewed in Canada on August 16, 2020
Pour outils quand je travaille sur la voiture tres bien construit .petit tiroir sur bearing et tablette qui se referme .tres satisfait
bassman
Reviewed in the United States on January 25, 2019
Great box and chair. Used for brake work. Worth it's wait in gold. Buy it. You will be happy
Aaron
Reviewed in the United States on December 10, 2018
Pros:Easy to assembleCompactTool cutouts for hand toolsSide trays can also be used for storageCons:Accommodating tools for it to store can be tricky due to the drawers small sizeDont expect to be comfy sitting on this for over a couple hrs
Canuck Craig
Reviewed in Canada on June 27, 2017
Assembly was easy and quick , instructions where crap, and blurry, but you don't really need instructions. Great chair for the price.
Gods Rider
Reviewed in the United States on March 12, 2017
Been a mechanic for many years and have owned many mechanics stools. This is the only one I have ever seen with drawers to keep tools in!! I have set it up with the basic tools for brake work and lighting since those are the "low" jobs on vehicles , and it is working out just GREAT!!!
Recommended Products
