Shopping Cart

Your cart is empty.

Your cart is empty.

Power Supply Module, Adjustable ZK 12KX Power Supply Module Voltage Regulator Constant Current DC DC 12A

Free shipping on orders over $29.99

$19.99

$ 9 .99 $9.99

In Stock
  • The design is beautiful and generous , with a crystal shell , and the buttons have a good touch texture.The module has 2 buttons: IN ,OUT and ON ,OFF: IN ,OUT button switches the display of input voltage and output voltage , long press can switch output current and output power display; ON ,OFF button controls output ON or OFF , long press can Set the default output state of the power on to ON or OFF.
  • The button can control the output to be turned off and on , and the poweron default can be set to ON or OFF. CC is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current , it enters the constant current state , the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer , rotating clockwise , can increase the output voltage.
  • High security , with input terminal anti reverse , reverse connection will not burn.Please make sure that the power of the power supply is always greater than the power required by the output load. Please reduce the power when the module is seriously hot!
  • The design is beautiful and generous, with a crystal shell, and the buttons have a good touch texture.
  • High security, with input terminal anti-reverse , reverse connection will not burn.


Specification:
Item Type: Power Supply Module
Model: ZK 12KX
Material: Plastic
Input Voltage: 5.3 32V (limit 35V; the lowest input voltage can be 4V to achieve step down , but the voltage and current measurement is not accurate when the input is lower than 5.3V)
Output Voltage: 1.2 30V (must make sure that the input voltage is higher than the output voltage , the minimum voltage difference between the two is 0.8V)
Output Current: 0.2 12A Maximum , if it exceeds 8A or the module temperature exceeds 65 , please strengthen heat dissipation (overload and overheating will not be guaranteed). When the output voltage is lower than 2V , the constant current is invalid.
Output Power: heat dissipation 120W (within 8A) , enhanced heat dissipation 160W
Voltage Display: Resolution: 0.05V , Range: 0 32V
Current Display: Resolution: 0.01A , Range: 0 12A
Conversion Efficiency: About 96%
Working Current: About 25mA
: Yes (it may fail when the module with high power load is started)
Input Reverse Connection : Yes
Anti backflow At The Output: None (If the load is self charged or a magnetic load , please connect an anti backflow diode in series to the positive output)
Short Circuit : Yes
LWH: Approx. 82 x 52 x 32mm , 3.2 x 2 x 1.3in
Package List:
1 x Power Supply Module
2 x Acrylic Board
1 x Heat Sink
2 x Button Plastic
4 x Hex Standoff Nut
4 x Hex Standoff Screw
8 x Screw