Your cart is empty.
Your cart is empty.Product Description
XUNHON Portable Bill Counter X01 Pro-Doesn't Count Value of Bills
Error Code Display
Most of the errors may be caused by dust or dirt on the inside of the machine. Keeping the machine clean is the most important thing.(Error Code E01,E02,E03,E04,E05 on the display mean that you should clean or replace sensor.)
EE1: Suspect bill detected without UV
EE2: Suspect bill detected without MG
EE4: A half bill is counted &The counting sensor is dirty or broken
EE5: The last counted bill is a double note
EE7: Slanting bill is detected
EE9: The bill width size is larger than 75mm
EEA: Chain bill is detected
BF: Wheels are running without bills
The way to adjust the up/down screw
After long use and long transportation, the screw might be loose. Now it is necessary to turn the screw clockwise to increase the friction. If the screw is too loose, two bills will be counted one time. If the screw is too tight, the banknote will be stuck.
Note: X01-Pro Money Counter detects only American currency and count all the things as long as its size within 110-180mm(L), 50-85mm(W), 0.075mm-0.15mm(Thickness). It counts number of bills, but not bill denomination.
Specification:
Weight: 5kg
Dimensions: 11.4inch×9.6inch×8.5inch（290mm×245mm×216mm）
Power Consumption: ≤90W
Counting Speed: ＞1000bills/min
Display range: Counting:4 Digits, Batch Counting:3 Digits
Banknote Size: 110-180mm(L), 50-85mm(W), 0.075mm-0.15mm(Thickness)
Noise: ＜60dB
This unit can be operated by using the main power or a rechargeable battery. It is built with a 2600mAh lithium battery, so it can be charged with the power adapter. It takes about 8 hours to be fully charged. After fully charging this money counter can work over 3 hours continuously. With the lithium battery the counting work will be not bound by power cord and the working efficiency will be large increased.
200 Bills Hooper Capacity
X01-Pro Money Count Machine has a large Hooper capacity which could be up to 200 bills one time. Compared to other bill counters with small capacity, it is more efficient, convenient and time-saving.
High Speed Motors
X01-Pro Bill Counter comes with a high speed motor which makes the counting machine count more than 1000 bills per minute. This highly saves the working time and increase the efficiency.
Efficient Heat Dissipation
The great heat dissipation system can keep the temperature of the bill counter always be normal. This will extend the life time of the bill counter and make the counting process safer.
Portable Carry Handle
With a hidden handle it is easy to transport the bill counter. You can take the machine anywhere easily. It is a good assistant both in office and other business occasions, mostly provide convenience to you.
Easy-to-use dimension
With the size 11.4*9.6*8.5inch the money counter is about the same size as a computer, saving space and effort to carry. When you go out to trade with others, it is much more convenient to have a such money counter.
Error alarm
When the fake bills are detected by the money counter, it will beep and shows error codes on the display. On this occasion you should remove the fake bills and the counting process will continue.
Dual Display
This bill counter has two large Displays. On the left side of the money counting machine comes with a display, it is mostly shown numbers for the staff. The external display shows numbers for the client.
Multiple Working Modes
Counterfeit Detection-All detection methods are enabled once the machine is turned on. If the machine detects an error due to one of these methods, the machine will stop counting to allow for removal of the suspect bill and an error code will display.
Ultraviolet Counterfeit Detection(UV)
The ultraviolet detector will look for suspect bills that use white or bleached paper.
Magnetic Counterfeit Detection(MG)
The magnetic detector will look for the presence of magnetic components that are standard in authentic bills.
Infrared Counterfeit Detection(IR)
The infrared sensor detects double and half notes and verifies proper dimensional specifications of bills.
Add Mode
The add mode displays the cumulative total of all bills counted. To turn the add mode on, press the “ADD” button.
Batch Mode
The machine is preset to common counting mode. To count bills in batches, press the “BAT” button. Batching is preset to 100bills. To change the batch number, press“+1” and “-10” button. Batch number available range is from 1 to 100.