Your cart is empty.
Your cart is empty. 1. Improved version, amphibious (inside and outside the tank). Incubate however you want, put it where you want.
2. Simple, practical, convenient to shrimp for fish feeding. Easily harvest shrimp without muddy water.
3. The process is very simple, easy to operate and use, and has a high incubation rate.
4. Made of plastic, non- and . A good and wise choice that you should make.
5. The suitable temperature is 25-28 degrees, can be used directly in the tank.
Specifications:
Item Type: Shrimp Eggs Hatcher Incubator
Material: Plastic
Weight: Approx. 238g / 8.4oz
How to use:
1. The clean water is first aerated, and then 90% aerated treated water is injected into the tank of the incubator, and then about 10g of coarse salt is added to the tank water to dissolve in advance.
2. Connect the aeration pump to the air inlet at the bottom of the incubator, adjust the air volume to the appropriate size, and the appropriate temperature is 28-30 ℃.
3. Put about 3-5g of brine shrimp eggs into it, and after about 36-48 hours (depending on the incubation temperature and the quality of brine shrimp eggs), it can smoothly.
4. Collection : After the brine shrimp eggs , stop oxygenation and let it sit for about 10-15 minutes. The brine shrimp to be hatched sink to the bottom and the shrimp shells float, and the brine shrimp larvae can be collected from the bottom of the incubator and small fish can be fed. .
5. Store uneaten brine shrimp larvae in the refrigerator and freeze.
6.The top entrance of the simple brine shrimp egg incubator is the air supply port. Adjust the supply air volume yourself. If the supply air volume is too large or too small, this will affect the hatching time and survival rate of the brine shrimp eggs. Adjust the supply air volume with the air control switch.
7. The air supply port on the top should be connected with a simple check valve, which can effectively prevent water
$25.15
$ 12 .99 $12.99