Shopping Cart

Your cart is empty.

Your cart is empty.

WINDFIRE DF260 Scuba Diving Flashlight IPX8 Waterproof Underwater Lights 4 Modes with Power Indicator and Green Light Scuba Dive Signal Light 2 Modes

5.0 Write Review
Free shipping on orders over $29.99

$71.99

$ 32 .99 $32.99

In Stock
  • 4 Modes DF180 Dive Light: The underwater waterproof flashlight has 4 modes(High-Medium-Low-SOS) to meet the requirement of different scenarios.
  • With Power Indicator: The power indicator can display the remaining battery level in real time. Green Light(over than 30%), Orange Light(10%-30%), Red Light Flash(less than 10%), This feature ensures that you charge the diving light in a timely manner.
  • IPX8 Waterproof Grade: The diving flashlight is made of tempered glass lens, aircraft-grade aluminum alloy case, with anti-wear coating and hard oxidation, anti-corrosive, 3 O-ring rings enhance waterproof performance.
  • High Visibility: This green dive signal light can improve visibility during nighttime diving, even in dimly lit underwater environments. *Please open the tail cover and remove the battery insulation sheet before use.*
  • 2 Lighting Modes: The green light tank light provides two lighting modes, you only need to press the tailgate button to easily switch lighting modes (flashing & constant mode).


DF260 Scuba Flashlight Specification:
Bulb Type: High power LED
Lumen: 6000 lumens
Beam Distance: 150 m(492 ft)
Underwater Depth: 80 m(262 ft)
Lens: 4mm tempered glass
Material: Aviation grode aluminum
Impact Resistant: 1.5 m(4.92 ft)
Waterproof Level: IPX8
Lighting Mode: High - Medium - Low - SOS
Runtime: 3-8 hours
Battery Support: 1*Rechargeable battery(Included)
Net Weight: 125 g(0.28 lb)
Product Size: 152*41.5*27 mm(5.98*1.63*1.06 in)
Scuba Dive Signal Light Specification:
Material: PP/303 Stainless steel
Lighting Color: Green
Lighting Modes: Flash - Constant
Power: 0.5W
Working Voltage: 3.7-4.5V
Product Dimensons: 24mm(Diameter)/61mm(Length)
Weight: 24g
  How to Use?
1.Please unscrew the tail cover and remove the separator before use.
2.Press the power button to switch modes(Flashing - Alway On - Off).
  Friendly Tips:
1.Before entering the water, please check if the waterproof ring is intact and tighten the tail cover.
2.After diving, it is recommended to soak in clean water for half an hour to remove salt.