Your cart is empty.
Your cart is empty.Product Description
10000W SCR Digital Voltage Regulator Module Board Speed Control Dimmer Thermostat AC 220V 80A
This voltage regulator is adjusted with button which is much more stable than potentiometer
It can easily adjust the output voltage on a scale of 0-(nonlinear) to power electric device
Designed with large and thick heat sink that would enhance heat dissipation
Eddie
Reviewed in the United States on September 2, 2022
The unit is as described however I have a couple complaints. One is no instructions. All though it's mostly self explanatory for novice to advanced users, if you don't have much electrical experience it could be difficult. Second is the control wire clip on unit side detached from circuit board on both units I bought.4/6 - The control 4 pin lead I have found to be too short. I clipped and lengthened to a more desirable length however, now neither of the digital displays work. (I bought two units)
Texas
Reviewed in the United States on May 10, 2022
This is the cats meow, it allows us to control heating elements in our distillery and so far so good. We never run it at max capacity , tops 9000. we also put an oversize small fan to ensure the temps do not get out of control!
William Fougere
Reviewed in the United States on June 10, 2020
Only used it 6 times so far but working flawlessly. I added a computer fan to dissipate any heat that occurs on the heatsink on the initial boil up. I knock it back to 50% to maintain the boil and no perceptible heat felt on the heatsink. Works Great!
cawen
Reviewed in the United States on May 11, 2020
I used it once and it was flawless. The second time I tried it blew the breaker and quit functioning completely. Back to the drawing board.
blacksmith
Reviewed in the United States on December 18, 2020
The plastic socket for the display was smashed, not because of the shipper, but because of the way the two parts of the device were packaged by the manufacturer. I was able to remove the broken pieces of the socket and bend the pins in order to make the unit work, but when I put the display legend film on the display there was no accommodation for the extended switches. The film glued itself to the switches and held them both depressed. I had to cut out around the switches and remove the film in order to make it work. In addition, no instructions or spec sheet, i.e. load parameters, current limitations, etc.
Dave
Reviewed in the United States on June 2, 2019
I used this to control a water heater element at 120V, and it's so far worked flawlessly. I have a voltage display and the adjustment seems linear. I am very impressed.
Jon Marcus Jr.
Reviewed in the United States on February 3, 2019
used this to control a 6500 watt 220v heating element on a still which requires precise temp control without on/off style controllers. it works great!
Recommended Products