Your cart is empty.
Your cart is empty.Product Description
transplant yooper
Reviewed in the United States on April 9, 2025
This is a pretty nice little relay box. The box, wiring, and relays seem to be of good quality. The lid of the box securely snaps on and should keep dust and moisture from getting in from the top. The mounting tabs are nice and should allow for a few different mounting positions. The instructions are sparse, but this is pretty straightforward. Depending on what you're going to be using the box for, you will most likely have to swap out a few of the lower amp fuses for larger ones. I'm going to be using the box with a couple different driving and off-road lights so will be making sure everything has the appropriate fuse for the current each light pair will be drawing. One thing I wish was different with this is that the leads should be a touch longer. I'd rather have more than I need and trim than have to struggle with leads that are a touch too short.All-in-all, a nice, simple relay box that will help clean up your under-hood wiring if you have multiple accessories or lights installed.
Esteban A. Valle
Reviewed in the United States on April 28, 2025
This seems well put together but it’s important to note carefully the wiring arrangement! ALL of the relays have a COMMON positive gate, meaning if you wire them up by default you can only switch ALL of them on or off at a time.If you want to switch them individually you actually have to switch/interrupt the GROUND on individual relay gates, not the positive which is fairly standard.I do wish it had a few extra non-relay fused outputs but that’s just not what this is for.NOTE: the descriptions says it comes with 1 special type relay but mine came with all 6 of the JT type relays.
Wes
Reviewed in the United States on April 20, 2025
I really like this panel. I had been adding relays to my 1989 Chevy Silverado and when the number reached 5 I decided I better start shopping for a fuse/relay panel. I chose this one because I liked that it had a door covering the wires going into the bottom of the relays. Being able to easily access the input wires and also being able to seal them off from the elements was a major selling point. Other than that the panel is pretty standard. The hot trigger wires are taped to their corresponding power output wires. The organization of this panel was a little off though. The relays are labelled 1 through 6. It would have been very easy to continue this and have the first fuse feed relay one, the second feed relay two, and so on, but no. The fuses are seemingly randomly hooked up with no rhyme or reason. It bothered me so much that I removed the fuse to relay wires, built new ones and reinstalled them so that fuse 1 feeds relay 1, and so on. At least that way if I run into any issues in the future diagnostic time should be very short. Other than that this panel has been great.
Patrick
Reviewed in the United States on April 15, 2025
Great for organization of some automotive accessories. No more wire nest under the hood. I also have a wireless switch panel so no need to run wires through the firewall. Makes for a really clean setup now. Functions well, no issues with any relays or fuses yet.
johnwd
Reviewed in the United States on April 13, 2025
This is a very robust 6-circuit box with a relay and fuse for each circuit. There is an input that makes all of these circuits so that the ignition switch would have to be set to Accessory or Run, your option, or that input can be connected directly to a fused always hot circuit, if you wish. I am really impressed by the quality of this item and it comes with a clear wiring diagram, which is great. The power wiring is 12 AWG which will limit it to 10-15 amps depending on the distance to the load. The device comes with one fuse each of 5, 10, 15, 20, 25, 30 amps, presumably to provide some options. I would assume anyone who is going to buy and install this will have an assortment of the correct sized fuses for each circuit. I do like this one!
Dr
Reviewed in the United States on April 11, 2025
The media could not be loaded.
Seth
Reviewed in the United States on April 10, 2025
The only thing that I have against this fuse box is that it is not waterproof. Splash resistant, Maybe, but there are no seals between the different pieces of the housing. The bottom can be removed, and of course so can the top.The best thing about this is that it's using real copper for all the wires. No copper clad aluminum, actual copper. To me that makes up the difference.It also comes with a paper wiring diagram to help understand how all the wires are routed and how you're intended to use them, which is a nice bonus.Overall, for the money, I think this is a good buy.
Recommended Products