Your cart is empty.
Your cart is empty.Product Description
Metal Film Resistor:
- Metal film resistors are axial resistors with a thin metal film as the resistive element. The thin film is usually deposited on a ceramic body.
- Metal film resistors have good characteristics for tolerance, stability, and TCR. Furthermore, the resistors feature low noise properties and a high linearity because of a low voltage coefficient.
- The appearance of metal film resistors is similar to carbon film resistors, but their properties for stability, accuracy, and reliability are considerably better.
Standard 5 Color Bands:
The resistor is covered with several coating layers that are baked individually. The coating protects against moisture and mechanical stresses, and preferably has a high dielectric strength. The resistor value is marked by color code bands or with text.
Accurate ratings: ±1% tolerence, 1/4W.
The Resistors have a much better performance than ordinary carbon equivalent.
Classification:
Each ohmic resistor is individually packaged and each resistance value is labeled with an additional label that helps you to quickly identify and sort them.
1/4W (0.25W) 73 Value Metal Film Resistor Assortment Kit:
Perfect for Breadboards:
Whether you are a beginner in electronics or need a high quality professional resistor, this resistor is the best choice for you.
Helmut Schmidt
Reviewed in Germany on February 6, 2025
Gutes Sortiment. Schon im Einsatz.
Gerhard Harz
Reviewed in Germany on April 7, 2025
Sehr praktisch mit den Tütchen
M. Rux
Reviewed in Germany on July 24, 2024
Die Widerstände sind getrennt, nach Werten sortiert und in kleinen beschrifteten Beuteln verpackt.Eine aufklebbare Farbcodetabelle lag auch bei.
Scott Dawe
Reviewed in Canada on May 24, 2024
Easy to read, organized and a great addition to my R/C hobby.
RMC
Reviewed in the United States on August 26, 2022
Lots of resistors with many values. The few test circuits I've built with them have worked as intended, so they seem to be accurate. I actually did have to test the resistance with a meter after my 10 year old disassembled my breadboard and made a pile of everything. I would have tried reading the codes, but they look like the bands were painted by a dog. I mean, the colors are not easy to differentiate, some are fairly thick bands while others are very narrow stripes, some are partially missing. It's hard to tell which end to read from. Bottom line, they're a pretty cheap price but they seem to work well (so far). As long as you pull them out of the baggies or use a meter to check them, you should be okay. Recommend.
LC in Michigan
Reviewed in the United States on June 11, 2021
I needed 120 ohm 1% resistors. These aren't even close to 1%. The resistance measured on two different Fluke Digital meters, one a 4-1/2 digit, the other a 5-1/2 digit 4-Wire Ohms measurement showed about the same resistance, about 117.8 to 118 .2 ohms. A 1% resistance deviation at 1% tolerance would have been between 118.8 ohms and 121.2 ohms. Additionally, all the color bands are dark and very hard to read. I'm very disappointed!
DF GA
Reviewed in the United States on May 5, 2021
Pros: They're boxed up, in numerical ORDER by ohms!Easy to sift through and find the right onesColor chartCons: sitting one out and forgetting the value, having to read the chart and TRY to see the color rings is unbearable when you have not-so-great vision. But they DO provide a chart which is really handy if push comes to shove.Would buy again for sure.
Customer
Reviewed in Canada on August 11, 2020
Parfait pour mes montages audio. Plus besoin de chercher les valeurs. Ménage un temps incroyable.
Kindle Customer
Reviewed in the United States on February 25, 2020
All values measured well within tolerance. Each value packed separately and well marked. The leads were thinner than what I had hope, but that seems to be pretty standard now compared to years ago. Still not a problem if your using a quality breadboard.
kerry keel
Reviewed in the United States on November 9, 2020
Bought resistors for stock need to be used as needed. Color code could be better. Best to check each device with a meter to know what it's value is. Other than that, these devices will do what they are designed to do. A superior PLUS for metal film resistors, you can get them hot enough to burn the surface paint off, but the element holds it's resistance value. That is not possible with carbon film, or carbon composition resistors.
J. Epstein
Reviewed in the United States on December 28, 2019
A well-organized, complete selection within its range. Note that the largest value is 1Megohm - I need a few values between 1M and 10M and had to cover them separately.The resistor leads are thin but that is actually a convenience - two leads can fit in a single standard perfboard hole if needed. And they have held up just fine to bending, resoldering, etc so they are not flimsy at all.
John
Reviewed in the United States on November 20, 2019
So handy to have all these values! They are actually pretty spot on with the values i think the 1% rating is certainly fair. The leads are a little thin though so they wont fit snuggly into breadboards or female headers.
Jamie M
Reviewed in the United States on May 26, 2018
Great value and variety. I also love that they came with a band legend sticker. That will be useful to stick on the lid of the sorting tray they will go into. On the down side; The pouches were not in order, a few of them were mislabeled (but the stamp on the ribbon was correct), and some of them were labeled differently even within the same value range. (See pictures)BUT, those few complaints are fairly trivial when you start to test and use these items; testing a random smattering of the resistors shows that they do indeed fall nicely within the 1% range, which is really all that matters here. Random tests pictured.
Recommended Products