Your cart is empty.
Your cart is empty.
4 Pieces 2 inch metal hold down brackets and 4 pieces pins, blind brackets blind holder replacements for horizontal blinds shades windows doors
Proper ans simple appearance:
These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well.
Installation procedures:
1 What you need: drill, screwdriver, tape measure, hammer, pencil.
2 If the bottom rail is not fitted with pins, drill a approx. 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail.
3 Punch the pins in.
4 Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil.
5 Screw the bracket to the door.
6 Measure the position of the bracket now screwed to the door and mark on the other side.
7 Then repeat the above steps to install the second bracket.
Specification:
Material: metal
Package includes:
4 x Hold down brackets
4 x Pin bolts
Warm notice:
Slight size errors may exist due to manual measurement.
To avoid choking hazard, please keep the products away from kids under the age of 3.
Mark
Reviewed in the United States on February 20, 2025
Perfect fit
Fred B.
Reviewed in the United States on May 21, 2024
Just what I needed thanks
Customer
Reviewed in the United States on December 17, 2024
So nice to not have the blinds clanging against the door every time its opened
rooster6758
Reviewed in the United States on March 14, 2023
These brackets worked well to hold down my venetian blinds, but I had to find screws that fit them so I can install...how much trouble is it to include a couple of screws with the brackets?
Malcolm Hoehn
Reviewed in Canada on August 4, 2022
Oder these to replace original plastic ones that were on my patio door to secure the blind. They work fantasic.
L. York
Reviewed in the United States on July 12, 2021
I was having issues with an outdoor solar shade coming loose , or breaking ,the plastic versions on my screened in deck. I had to drill a larger hole for the metal pin in the end of the hembar, but once it was all assembled..these are ROCK SOLID!
Heather
Reviewed in the United States on May 5, 2021
The plastic blind brackets that come with the blinds maybe last two weeks in my house. My cats like to rub their face on the corner of the blinds and sometimes have a desire to look outside and paw at the bottom of the blinds. Needless to say the plastic was no match for the kitties. My husband and I have dealt with our blinds not be “attached” to the door/window for well over two years and I was over it. Found these little puppies online and they worked like a charm and guess what.... they are currently holding strong against the cats trying to “break” them.
Tom M.
Reviewed in the United States on March 17, 2021
What needs to be added to the Amazon listing is critical dimensions of the parts: diameter of the pin bolt (peg), length of the pin bolt peg and the bracket base to peg hole centerline dimension and the bracket's mounting hole to hole center line for the mounting screws (not included by the way). Unfortunately, I had to order this package to determine they aren't a simple replacement for the existing plastic retention clips. The size of the hole in our wooden blind base would have to be increased as well as the depth of the hole and the mounting holes for the base do not line up with the existing plastic bracket being replaced. And of course, no screws included. Come on guys, 4 screws at the volume you purchase them cost less than 2 cents total!! The supplier could save a lot of hassle by including this information in the listing. I am including here for future buyers.Pin diameter: 3/16 inch.Length of pin after it is put in the mounting bracket: 5/8 inch.Bracket mounting hole centerline to centerline: 1.25 inch.Bracket base to mounting pin (peg): 1.1875 (1 and 3/16 inch)
Marilyn H.
Reviewed in the United States on November 4, 2021
These were fine with holding the blinds down but like other customers I think it’s ridiculous that they could not put screws in for the price you pay for these. other than that they’re nice
Recommended Products
