Shopping Cart

Your cart is empty.

Your cart is empty.

2024 Navigation SD Card Update GPS Map 86271 0E076 Compatible with Toyota 4Runner Avalon Camry Corolla Highlander Prius Sequoia Sienna Tacoma Tundra Rav4 | USA & Canada

Free shipping on orders over $29.99

$20.99

$ 9 .99 $9.99

In Stock

About this item

  • Navigation SD Card Vehicle Fit: (4 Runner 2014, 2015, 2016, 2017,2018, 2019,2020). (Avalon 2015, 2016, 2017, 2018). (Camry/Camry Hybrid 2014,2015,2016,2017). (Corolla 2014, 2015, 2016,2017, 2018). (Highlander/Highlander Hybrid 2014,2015,2016,2017,2018). (Mirai 2016,2017,2018)
  • Navigation SD Card Vehicle Fit: (Rav4 2014,2015,2016,2017,2018). (Sequoia 2014,2015,2016,2017,2018). (Sienna 2015,2016,2017). (Tacoma 2014,2015,2016,2017,2018). (Tundra 2014,2015,2016,2017,2018). (Venza 2015,2016). (Prius 2016,2017,2018). (Prius C 2015,2016,2017,2018). (Prius V 2015,2016,2017)
  • NOT Compatible with LEXUS: NOT Compatible with Lexus!!!!
  • 20 Minute Safe Installation: ① Turn engine OFF 20+ minutes ② Swap SD cards ③ Start engine auto-updates in 10-20 mins (Do NOT turn off during update)
  • 2024 Maps with 2023 Road Data: Industry-standard 6-12 month update delay "2024" maps based on August 2023 infrastructure
  • Reliable Offline Navigation: No internet required Works in mountains, deserts & backroads with zero cell signal Updates include new roads, speed limits & points of interest
  • Critical Usage Warnings: Permanently locks to your Toyota after first use; Never insert into phones/computers – causes permanent damage



Product Description

Navigation SD Card Map Update Accessories 86271 0E076 Compatible with Toyota Tacoma Highlander RAV4 Tundra 4Runner Sienna Prius Venza Mirai Corolla

Toyota navigation sd card

SD Navigation Card Installation

Step 1: Make sure your car is completely turned off (wait at least 20 minutes) before popping in the new SD card.

Step 2: Open the center console and look for the SD card slot. If you’re not sure where it is, check your Owner’s Manual.

Step 3: Press the slot cover to pop it open, then slide the SD card in with the label facing up.

Step 4: Turn the car on (but don’t drive!) and keep the engine running until the navigation screen says the update is done.

Step 5: If the SD card doesn’t work at first:

  • Pull it out and try again, or
  • Leave it plugged in for a few hours (or even overnight) while the car’s off. Sometimes it just needs extra time to kick in.

NOT Compatible with Lexus !!!!!

Compatible with Toyota Models

Sienna 2015, 2016, 2017
Tacoma 2014, 2015, 2016, 2017, 2018
Tundra 2014, 2015, 2016, 2017, 2018
Venza 2015, 2016
Prius 2016, 2017, 2018
Prius C 2015, 2016, 2017, 2018
Prius V 2015, 2016, 2017
4 Runner 2014, 2015, 2016, 2017, 2018, 2019, 2020
Avalon 2015, 2016, 2017, 2018
Camry/Camry Hybrid 2014, 2015, 2016, 2017
Corolla 2014, 2015, 2016, 2017, 2018
Highlander/Highlander Hybrid 2014, 2015, 2016, 2017, 2018
Mirai 2016, 2017, 2018
Rav4 2014, 2015, 2016, 2017, 2018
Sequoia 2014, 2015, 2016, 2017, 2018

SD Navigation Card Map Data Dates Explanation

All navigation SD cards are basically 6-12 months behind real-world roads. That "2024" map you're getting? It's actually frozen in time from August 2023. Here's why: companies need baked-in time to manufacture the cards, ship them worldwide, and get them on store shelves.

Think of it like this: If someone built a new neighborhood or changed a road rule in September 2023? That won't show up until the next year's SD card. This delayed timeline is standard across the car navigation industry.

Toyota Navigation SD Card Warning

WARNING!

  1. Never plug the navigation SD card into phones, laptops, or other devices—it can corrupt the data or permanently break the card.
  2. These cards "lock" to your car after first use. Once installed, they won’t work in another vehicle.
  3. Wait 20+ minutes after turning off the car before swapping SD cards. This lets the system fully reset.

Why this matters:

  • The card pairs with your car’s software like a digital handshake. Messing with it risks bricking the card.
  • That 20-minute cooldown? It’s not a suggestion—your navigation system needs time to power down completely.

Joel
Reviewed in the United States on May 9, 2025
Easy to follow instructions, took about 5-7 mins to install.
Wally
Reviewed in the United States on May 17, 2025
IT's ALWAYS nice when a $20.00 item works smoothly and beats the dealer's price by $150. Can't beat the price.
EC
Reviewed in the United States on April 2, 2025
I bought this for my 2015 Camry XLE and found the installation very easy to do, even for a senior lady!The best instructions were found on the questions & answers part. Follow these: 20 Minute Safe Installation: ① Turn engine OFF 20+ minutes ② Swap SD cards ③ Start engine auto-updates in 10-20 mins (Do NOT turn off during update)How simple is that? The update kept all of my saved destinations. I have not given it a test drive yet, but feel confident we're good to go. Will change my review if difficulties arise.
Customer
Reviewed in the United States on April 15, 2025
I never write reviews but this was great. I went to my local Toyota dealership and they want 300 dollars to update the software. I am very happy with this purchase. Super easy and fast
Robert
Reviewed in the United States on April 15, 2025
Plug and play.Great update
Peter's Product Picks
Reviewed in the United States on April 12, 2025
The installation of this card in my vehicle took a maximum of 20-25 minutes. Just follow the instructions and make sure to keep the car on for 20 minutes after the last startup to ensure that everything downloads, transfers, and updates correctly. It really was plug and play.This new card added new streets and ensured that the traffic information has evolved since 2015. I’m impressed with the updated routing and it seems to have eliminated some of the quirks that the old chips had. While I still use my map software on my phone more often, it's reassuring to know that the vehicle’s system is up to date and providing better guidance when needed.
Mr. Gadget
Reviewed in the United States on April 11, 2025
I’ve never updated the maps in the navigation system of my 2016 Highlander. Though it was about time, so I ordered this. Pooped it in the Map Card slot and started the engine just like the instructions say. Not the instructions that come with the chip. It doesn’t come with any. I did a quick search, found and followed the instruction for the map update process. It was very easy to install. Took 10-15 min to complete. Rebooted twice before it was done. Worked perfectly, and for much less money than a dealer would charge.
FunLuvr
Reviewed in the United States on April 1, 2025
I’m using this 2024 Navigation SD card in my 2016 Toyota 4Runner, and it’s been a solid upgrade. Swapping it out was easy—just pulled the old one and popped this in. The system took a minute to update, then it was ready to go.The biggest difference I’ve noticed is that the maps are finally up to date. Roads that didn’t exist before now show up, and a few weird routing quirks I had with the old version seem to be fixed. I still don’t use the built-in nav as much as I used to, now that phones have taken over most of that duty, but I like having it there for backup—especially when I’m out somewhere with no signal.It’s not going to magically turn the old Toyota system into something modern, but it does make it more usable. If your factory nav is still part of your routine, this card makes it worth keeping around.
Recommended Products