Your cart is empty.
Your cart is empty.Product Description
Water Level Control Valve 304 Stainless Steel Float Valve
How does the float valve works?
When the water level in the tank rises to the control line, the water supply is automatically stopped. As the water level drops, the float valve automatically opens to refill the tank, maintaining a full water level.Keep your tank water topped off.
Advantages
- It come with clip,1/2" to 3/4" fittings,elbow
- Ease of installation and maintenance
- Works under water pressure up to 10 bars
- Automatically fill and shut off water
- Small size compared to the old float valve
- lt has a long life span of up to five years
- Valve design gives it the ability to be widely used
Use more Teflon tapes to stop leakage
The straight thread needs Teflon tape to seal, if it leak water still, that means the Teflon tape is not enough on the thread, need to add more Teflon tape, normally hand-tighten it with 6-10 layers of PTFE tape to eliminate any leaks. If the free Teflon tape is not enough, you can buy some of it from local hardware store.
Automatic 304 Stainless Steel Float Valve with Clip
Auto Self-stop & Self-open water
The float valve automatically refills water for your water tank,water tower,livestock,animal water drinker when water drops below the valve level. Once it reaches the valve, it would automatically stop refilling water,so it will shut-off when the water reaches the internal float.
No electricity requested
A ball float valve inside allows water to flow until a specific level is reached. Once the water reaches this level, the float valve will be pushed up with water due to buoyancy and stop the flow of water. When the water level starts dropping, the valve will open again, and the water will start to flow again,so no need electricity.
Teflon Tape and Clip
The clip can mount the float valve on your tank, Teflon tape is to prevent water leakage.Must add more Teflon tapes if it leaks
304 Stainless Steel Automatic Water Level Control
304 food-grade stainless steel,delicate and beautiful appearance, hard shell, drop resistance and friction resistance.
1/2" to 3/4" and 1" fittings
When your pipe thread is 3/4" or 1", you can use the adapter to switch 1/2", so you can use the 1/2" valve as well.
1/2'' Stainless Steel Elbow
1/2" Water Tank Float Valve with Side water intake turning head,it can be easily used. So the water inlet come in from side, you can use the elbow
Application
Product Instructions:
- Applicable water pressure range: Min 0.2 Max 10KG (please use it under reasonable conditions)
- The product must be installed vertically on the horizontal plane, and the float valve must be downward during installation
- Please fix the water pipe on the horizontal plane first, and then install the product on the water inlet pipe
- When in use, the stop valve of this valve must be fully opened
- If two ball valves are installed in a pool, they should be kept at the same level
- Before installation, please clean the impurities in the pipe to avoid impurities blocking the ball valve.
Jim
Reviewed in the United States on May 22, 2025
Only worked for a week
Frannie
Reviewed in the United States on May 20, 2025
These valves work great, are easy to install. I like the self contained system.
Julie Huxman
Reviewed in the United States on May 16, 2025
It's easy to forget that you're watering livestock and this float valve saves a big mess and money..
Recommended Products