Your cart is empty.
Your cart is empty.Regulator With 160psi Gauge Oiler Lubricator, Oil & Water Separator Unit Air Inlet: 3/8" Max. Pressure of 150PSI Temperature Range: 5-60 degrees C (40-160F)
Bwana Dave
Reviewed in the United States on April 7, 2020
This product is a great deal for the price.
SJX40250
Reviewed in the United States on March 13, 2019
This product looks fine until you assemble with the parts. ALL the NPT ports are bored too deep preventing effective seal. The worst part is that when you tighten everything up you will likely not hear the air escaping. Your compressor will be running more frequently.This is true with the dial as well. you can't tighten it enough without it running into the retention ring of the water trap bowl.The solution is to use plumbers seal and then rig up an extension for the dial to space it our far enough to not interfere with the retention ring of the bowlNPT has been around for a long time. how is it that the manufacturing of this product doesn't know how to treat NPT's. Lack of serious industrial engineering requirements, ignorance of practice and no quality control (hence the price).
Benny Matsson
Reviewed in the United States on January 2, 2019
I will be using the regulator with water/oil separator with my Craftsman compressor. I like the size of the product and it appears to be well made. Have yet to install it as we are on a vacation in Florida. Had it shipped here and will bring it home with me. Well packaged with bubble wrap in a sturdy box.
Kuips
Reviewed in the United States on January 12, 2019
Seems just ok. Quality seems to be lacking. See pics of blocked inlet. I spent 30 minutes making it right. Also once the guage is tightened on, it comes in contact with the bowl ring of the drier. I bought a nipple and coupler to extended it.
Mike
Reviewed in the United States on September 5, 2018
This regulator is working fine so far. It seems to regulate the pressure and it is oiling my tools.
Nicholas B.
Reviewed in the United States on August 10, 2018
This works as intended, keep in mind that you need to cool the air coming out of your compressor for this to work correctly. Perfect for a shade tree shop.
JS Machine
Reviewed in the United States on October 22, 2016
Good value to cost. Took one star away only cause when the air is turned off then on the drain for the water leaks air. I have to twist it a bit to get it to seal up. As long as there is pressure it seals fine.
Christopher Delp
Reviewed in the United States on October 26, 2015
Worked but with issues. The problem is with the spacing or location of the 1/8"npt port for the pressure gauge. The gauge comes into contact with the fastener ring of the collection bowl. Luckily I had an extension pipe to extend the gauge out to clear the ring.Second issue came up about a year later when the plastic sight piece on the oiler snapped at the threads and started leaking. I have two of these regulators and it did it on both. JBwelded the hole, works fine now. Had to drop a star though.
Recommended Products
$271.27
$ 99 .00 $99.00