Your cart is empty.
Your cart is empty.Product Description
ABBECIAO 1 1/2" x 1/4" Aluminum 3D Rectangle Stamping Blanks
ABBECIAO Aluminum 3D Rectangle Stamping Blanks
Products Details
Size
SIZE: Width: 1/4 inch solid aluminum bar stamping tags, Length: 1.5 inches
Burr-free
Our 3d Bar is tumbled with no burr, great for jewelry making and DIY projects
Made of high quality aluminum
Solid, thick, deburred edges, and non-tarnish, skin-friendly
4 sided bars
You can stamp on all 4 sides of this 3d rectangle bar
Elizabeth
Reviewed in the United States on June 24, 2023
Got these to make mothers day necklacesWorked out great 👍
Sunward
Reviewed in the United States on March 24, 2023
I really like the thickness of these aluminum bars. I am in no way an expert with metal stamping, more of a beginner hobbyist. In the pic above I used a 1.5mm deco font stamp. I tried to go up to as much as 6mm but they just barley fit, going to the edges. I like that these can be used for necklaces, keychains or just ID tags for items, as well as having four sides. I used regular old school metal stamps, so I couldn't tell you how they work with other systems. Overall, very nice, no sharp edges, or metal irregularities.
ACG
Reviewed in the United States on March 24, 2023
Each solid aluminum bar has a nice weight and finish. The hole is 1/8" wide, and it leaves about 1 5/16" of workable surface on 2 of the sides. I had no problem using metal stamps on the smooth surface, and I'm happy with the results.I originally ordered these rectangle bars to make small metal keyrings for friends and family. I like them so much, I may make them into necklace charms as well. Plenty of crafting options to choose from...
zerospace
Reviewed in the United States on March 19, 2023
I usually don't go for aluminum stamping blanks (I much prefer sterling, copper, or brass), but these were just too tempting not to try. Price for what you get -- they're a good deal.A little history on my perspective: I ran a very successful jewelry shop on Etsy for over 10 years, only calling it quits recently, because it took up too much of my time. Metal stamping was a big part of my daily shop tasks, as I sold a lot of fidget spinner rings made using metal stamps.About these blanks: So they're nice size (exactly as described, 1.5 inches long by 1/4 inch thick) with a decent finish. I say decent, because it could be better. They are shiny overall, but there's some surface imperfections (nothing that can't be polished out with the right tools). The long edges are nice and smooth, but the ends where these are clearly cut from square shaped aluminum rods could be better rounded/sanded/polished. These are not difficult things to fix, though, so as long as you aren't against doing a tiny bit of work to make them perfect, these are totally fine.How'd they take stamping impressions? Fantastic! Exactly like you'd expect from soft aluminum. You'll definitely need a steel bench block to get a good impression on these, so don't skip that. I also use a rubber block beneath my steel block for maximum impression with minimum noise. My photos show a test piece I made with the first blank I pulled from the package. Take it as you will. I did NO extra polishing (not yet, anyway -- I will), so this will show you what the finish is like. FYI: I've darkened my stamping with gilders paste wax.These only lose 1 star for the finish. I would definitely buy these again!
P. Harvey
Reviewed in the United States on October 24, 2023
I ordered this right after getting my xtool diode laser and was going to try to make some little keychains with it. I soon came to realize that these will not engrave on their own without some kind of etching spray. They came packaged nicely and seem to be of good quality, but I didn't research things thoroughly enough before ordering them.
Customer
Reviewed in the United States on April 29, 2023
I’m a beginner and these were super easy to use. My 10 year old was able to make her own key chains as well
Tina Deas
Reviewed in the United States on April 20, 2023
These worked as expected. My customers love their products and I have got no complaints about these changing colors,
Arnoldo Romero
Reviewed in the United States on April 11, 2023
I like embossing blanks to use as tags or to make gifts. The ABBECIAO aluminum 3D rectangular prism blanks work perfectly. They are approximately 1.5” x .25 x .25” more less. I have an alphabet set and some embellishment stamps that I can use to hammer on the designs. It doesn’t take much to get a nice impression on them, and they don’t loose their shape either when hammering on them. I’m turning this one I made in the picture into a key ring. However, they could be use do make jewelry too, since they’d work well to make pendants or earrings too. I’d definitely recommend these blanks to other artists.
Recommended Products
$23.99
$ 12 .99 $12.99