Your cart is empty.
Your cart is empty.
Feature:
Material: Aluminum Alloy.
Color: Black with Red Cover.
Suitable for 1:10 Axial Wraith 90018.
HD Steel internal gears and driveshafts,aluminum knuckles, alu hub carriers, and alu wheel hexes.
Machined from aluminum and anodized for good looks,heavy duty steering linkage set for added durability.
Package Includes:
1 x Front Axle for 1/10 Axial Wraith 90018
1 x Rear Axle for 1/10 Axial Wraith 90018
Charles neal
Reviewed in the United States on June 6, 2023
Great axles. Fit perfect on my rr10 axial bomber. Had a bent part months after ordering and the seller helped me find replacement parts. They replied almost immediately to my inquiry and were very helpful!!!
Rick Keeney
Reviewed in the United States on March 24, 2023
They look good and that’s the end of the good. No other stock or aftermarket internals will work in them. The shafts in these are smaller diameter than stock Axial and they’re made of pot metal that brakes easily. Mine even came with one of the rear axle shafts barely long enough to mount the wheel on. So it came loose constantly do to not having enough thread to get the nut to the nylock. They lasted about 3 runs and a shaft snapped revealing air pockets in the metal. Do yourself a favor and buy Vanquish.
alex reeve
Reviewed in the United States on August 29, 2022
Worked great on my fj55 project seem sturdy and look bad ass love the wide stance of an ar60 axel time will tell if they hold up but for now 100 % awesome
chase abercrombie
Reviewed in the United States on November 17, 2022
If you're familiar with full size offroad, this is pretty much a hybrid dana 60/ 9 inch axle. Removable capra style 3rd members that can be flipped for hi pinion or low with ar60 axle shafts and outers. High quality hardware and casting work on axle. Bearings at diff were dry but they are an open cage style bearing that can be packed with grease. Only flaw i know of is junk steering linkage and no loctite. Suggest a full teardown with blue loctite or every screw will back out.Almost 2 years later still holding up to hard heavy rig abuse. Vanquish Bomber outers and panhard bar bracket bolts on snug to the housing and Vanquish Capra gears fit in perfectly. Great builders axle with swaybar brackets front and rear.
Michelle
Reviewed in the United States on August 17, 2020
I've put 20+ 3s packs through these on my crawler and here is what I think. They are ok but I wouldn't purchase again. I really like the idea of AR44 gears in an AR60 width axle for better ground clearance and lower gear ratio availability for less torque twist. However there are several issues which makes these not worth purchasing. If you are considering these, you can add in the expense of replacing the steering linkage, rear axle shafts, wheel hexes, M4 axle nuts and possibly ring & pinion. Read on to see why:Axles require full disassembly and reassembly with thread locker. Gears / pinion are not properly oriented or shimmed. If you run these without shimming and greasing the gears they won't last long, just too much slop. Gear ratio is 8/24T = 3:1. Not sure why these don't come with the standard 8/30T (3.75:1 ratio) that other AR44 axles have. The link mounts don't fit the axle housing properly due to poor machining and dremeling is required. Rear axle shafts bend very easily. The steering linkage is total garbage, it lasted 1/2 battery before the pressed in ball retainers came out. The axle nuts go straight in the trash. The 12mm hexes are 10mm wide which leaves minimal thread engagement, so throw those away. Bearing fitment is poor in most locations especially in the steering knuckles, so lots of slop there.My axles arrived with a bent rear axle shafts and the threads stripped on both. The seller responded quickly with a partial credit that almost covered the cost of replacement axles shafts.The universals seem to be holding up well and the housings are much heavier than plastic housing which is great for a crawler. The C-hubs are tough and have brass steering bushings!Minor components can be replaced with standard AR60 stuff: Axle shafts, bearings, AR44 gears, steering links.Major component parts are not available separately: 3rd member / pinion carrier, center housings, truss, etc.Another company (KYX) offers this style axle with 8/30T ratio gears, steering linkage with replaceable rod ends and Axial style 12mm hexes. Of course they are ~$55 more but look to be better quality.
bryce stewart
Reviewed in the United States on April 28, 2020
Ok so metal wraith axles that look decent, not to bulky, and will kinda fit replacement parts, these will work, sorta.... First run with them 5200kv brushless 120amp esc on 2 cell lipo.... I snapped the threaded tip of the axle off one of my rear tires. I had a replacement hardened steal axle. This was the fun part, you do not need beef tubes as the axel shafts are one solid piece of aluminum stock cut, milled, and drilled. Draw back was the drilled hole was to little to put the new axel in.... I had to grind off the lip on the new axle to allow it to pass through. There is no diff cover. To mess with the gears on the inside you have to take the face of the axle off. I do not think this is normal but where you would attach a sway bar to the axle one side seems to sit higher than the other. The link mounts also appear to do the same, and sticks out a little further.... For a crawler build i think these would be great low speed high torque metal/heavy low center of gravity beef. For a 40mph monster truck with massive amount of torque expect a few hiccups. Decent for the price, but dont expect bulletproof axles for $100.00. Keep it on a 10mph crawler if you dont plan to sink more money into gears and bearings and axle shafts. The steering linkage and knuckles seem pretty solid. Parts do need loctite and greese. Came with extremely big hex adapters too. Normally i think they are 10mm or so, these where 2 or 3 time bigger. Kicks the tire out so far you can barely get the nylon of the lock nut to hit the threads of the axle. All and all seems a good deal if you dont plan to bash with it.
DanoCal
Reviewed in the United States on November 7, 2019
These are fantastic! Well made, heavy duty and perfect fitment!! I put these on an original Axial SCX10, with a STRC chassis lift kit to make my mud truck. Turned out, awesome! I would HIGHLY recommend these, over the more expensive AR60 metal axles!!
Sethjohnson
Reviewed in the United States on November 22, 2019
These axles look good out of the box but bolts are loose so you need to take every bolt out and locktite it because they will all back out next thing the axle nuts they send you to hold the wheel on are junk they will strip out the first time you put them on and last but not least the axle shafts are SUPER weak I have a rr10 bomber and did a jump when I landed it bent the axle I tried to fix it with some heat but it snapped Off me and my buddy both bought a set of these axles and have had close to the same issues would I buy these again maybe just bc the housings are nice I would recommend buying better axle shafts off the bat
Recommended Products
