Your cart is empty.
Your cart is empty.Product Description
- Help you switch from vertical to horizontal shooting quickly.
- Designed for DJI Ronin RS2 RSC2 Zhiyun Weebill-S,also compatible with SLRs Tripod Monopod.
- Adopt horizontal and vertical plate separable design,the vertical plate can change position on the three sides of horizontal plate.
1/4" Screw Hole Extension
1/4" expand screw on both horizontal and vertical plate, can be used for Lens Support,overall balance and more photography equipment.
Precise Control
Marked with a scale on both horizontal and vertical plate,easier to adjust the camera position more quickly.
Non-slip Mat
Anti-scratch spacers are included with both the horizontal and vertical plates to protect your camera from scratches.
Features
- Weight: 113g(0.29 lbs)
- Product Size: 110*95*64mm
- Material: Aluminum
- Compatible for: DJI Ronin RS2 RSC2 Zhiyun Weebill-S Gimbal Stabilizer Tripod Monopod and SLRs
Package List
- 1 * Horizontal QR Plate
- 1 * Vertical QR Plate
- 2 * Locating screw
- 1 * L-shaped installation tool
- 1 * L-shaped tool for RSC/RSC2(adjust tightness of QR slot)
Heidi H.
Reviewed in the United States on January 16, 2025
It does ultimately fit although it took me about an hour to figure it out. There is tape included to make the sides of the mount bulkier to fit the weebill series, and while it does work I don’t love this workaround. The mount also puts the camera too high and I couldn’t get it to balance - ultimately had to flip the lower arm over and undersling the mount to make it balance. Don’t love this either. However it does ultimately fit this camera, enough that I won’t return it so keep that in mind. If you can’t find another mount, you can make this one work for the weebill family
sean
Reviewed in Canada on July 21, 2023
This DOES NOT support the new DJI gimbals. Don't buy it. Anything that has to be forced on is garbage.
Ron Kramer
Reviewed in the United States on July 12, 2023
It doesn't use the lock stoppers of the DJI gimbal like the DJI mount uses. = (Also, I don't like the mounting screws there is no FLAP on the screws to tighten them down,A screwdriver or coin/tool is needed to attach and remove the mount from the camera.
Customer
Reviewed in the United States on May 12, 2023
The product description needs to be updated. This does NOT fit the RSC2 model. Sure it can be forced into position, but any product that needs to be forced is not properly designed.
Oliver Bou Eid
Reviewed in the United Arab Emirates on March 18, 2023
Very good
Jay
Reviewed in the United States on February 4, 2023
It is in fact NOT easy switching between the two orientations. If you want to film both vertically and horizontally in one session, this product is not right for you. The product is designed to replace the gimbal's entire base plate (I have Ronin RS2), and it is not meant to be mounted on the quick-release plate like some people may believe. If you want to mount horizontally, you MUST remove the vertical wall and mount the camera onto the base plate. That means carrying the Allen key and making sure not to lose the screws. All of this is evident in the description photos, so I won't deduct any stars. It's one of those realizations you get only until trying the product.
Marcelo Silva
Reviewed in the United States on February 14, 2023
This was a pain to get on my gimbal, luckily it barely fits, but you do need to put a lot of force to get it to slide in far enough back. Hoping it doesn’t damage my gimbal. Besides that, product works fine
Anthony
Reviewed in the United States on December 13, 2022
One of the answered questions says that this will fit the Ronin S.The plate doesnt fit into the receiver on gimbal. Its as if the tolerances are machined too tight.
Marlon
Reviewed in the United States on December 10, 2022
It definitely fits on a Weebill S , but due to it being a raised plate it doesn’t work when paired with a 5d mkiii , the camera hits the gimbal and can’t be balanced properly , so it’s more a Camera compatibility issue than a gimbal compatibility issue .
Mo
Reviewed in the United States on November 9, 2022
I have not connected it yet but all the parts are there and it is a good solid piece. It should work fine.
Recommended Products