Your cart is empty.
Your cart is empty.Product Description
Why Astarpro
OE Design-restore OE performance, handing and ride
Maximum Coverage-Convenient solution, complete repair, application specific
Quality Innovation-Re-engineered by OE defect, keep maximum fixation
Package Includes:
- 1x Front Outer Tie Rod End Link (Driver) - ES800594
- 1x Front Outer Tie Rod End Link (Passenger) - ES800593 (M25×1.5-6g thread)
- Spectrum Analyzing
- Salt Spraying Testing
- Three-coordinate Measuring
- Magnetic Flaw Detection
- Rubber Oxidation Testing
- Hardness Testing
- Pull-out Force Testing
- Endurance Testing
Astarpro Advantage
Qualified Product
High strength patented multi-lip locking boot and Labor Saver hardware included for quick easy install. Easy-snap locking pin securely locks the ball joint.
Pre-locked Thread
Thread lock is pre-applied on inner tie rods, removing the need of applying it and reducing the time of installing the product.
Longer Wrench Flat
Tie rods designed with longer wrench flats that provide a larger area for using a wrench which eases installation.
Greaseable socket
Pre-greased ball joint with Grease fitting allowing lubricant to flush contaminants and can extend service life.
Steering Tie Rod End should be checked and replaced when you encounter the following problems:
Steering Wheel Vibrations
When the Steering Tie Rod End become excessively worn, it will make wheel shimmy, which may cause vibrations felt in the wheel.The intensity of the vibrations will increase as you step on the accelerator pedal to go faster.
Clunking Noises
If Steering Tie Rod End develop excessive play or looseness, this can cause them to knock during takeoff, or when the vehicle is traveling over rough terrain. The clunking sound will continuously get louder as the component wears or until it eventually breaks.
Steering Wandering
Excessively worn Steering Tie Rod End can cause the vehicle’s steering alignment to shift, which may cause the steering to pull to the left or right when traveling down the road.
jeffrey jenkins
Reviewed in the United States on June 3, 2024
The ASTARPRO Front Outer Tie Rod Ends are perfect for my 2007 Jeep Wrangler JK! They fit seamlessly and have made a noticeable difference in handling and stability. Installing them was straightforward, and they are compatible with 2007-2017 Jeep Wranglers and the 2018 Jeep Wrangler JK.
Curt
Reviewed in the United States on June 25, 2024
Quality of machining is fine, fit OE tie rod just fine on left side. Longevity is the question and only time will tell. One thing to note through, JK tie rods only have one replaceable end, at least that is how mine is. The right side is factory crimped and cannot be taken apart by any normal means. That said you will need to get a whole tie rod assembly anyway so I don’t know why these are offered as a left and right set.
Yusly V.
Reviewed in the United States on June 13, 2024
Broke while putting it on
JasonVideo
Reviewed in the United States on May 19, 2024
I see that some reviews claim that these don't fit right or aren't tight. They worked just fine on my 2013 Jeep Wrangler. Yes you have to use the existing sleeve which is a pain because they are hard to get off, but for the price, why not reuse and reduce waste? Yes, replacing the whole tie rod with ends already attached would be a lot easier, but with added cost. In my case I already had an adjustable tie rod, so these ends were all I needed. Just be liberal with the penetrating lube a couple of days before you plan to do the work and it will help a lot.The ends are heavy and feel very strong. I love that they're greaseable, as nothing else on the Jeep JK is. The ride is 'probably' improved after installation, but my ball joints are also in need of replacing, so time will tell.
I am CJ - They call me "The Doctor" (of Tech)
Reviewed in the United States on February 23, 2024
These tie rod ends are for my 2010 JK of which I am replacing literally everything in the front end as part of a renewal. The vehicle has only 51,000 miles but has BIG suspension and tires so things like these ends get beat up! I "could" get fancy expensive tie rod ends but we have done this over and over again and I only barely get a few more miles out of those than nice heavy non-branded ends like these, but these are a quarter the price so I end up maybe changing 50% sooner but since I do not like ANY play in my steering, I get more bang for my buck with these and keep nice tight steering better and longer for the same buck! These are inexpensive but "not cheap", if you understand my meaning in saying like that...
AAdkerson
Reviewed in the United States on November 25, 2024
Good quality. With grease fittings
Mike81
Reviewed in the United States on January 25, 2024
This is a horrible replacement part. Does not fit correctly. Does not come with necessary hardware for a proper installation. No jam not and thread's in extremely loose can wiggle. Will not take an alignment or hold an alignment. Money and time wasted with this product.
Recommended Products
$39.95
$ 17 .99 $17.99