Shopping Cart

Your cart is empty.

Your cart is empty.

ATO Digital Rotary Torque Sensor, Dynamic Torque sensors 50Nm with LCD Display for Motor Speed Measurement, Output Signal RS485 & ±5V (50 Nm)

Free shipping on orders over $29.99

$1,021.99

$ 99 .00 $99.00

In Stock

1.MaterialType:0.1 Nm


About this item

  • ATO rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, ATO torque power tester can directly output standard signal to PLC, DCS and other automation control systems, **Output Signal---RS485 & ±5V
  • 【Lowest Measured Value (Nm)】The non-linearity of ATO Digital non-contact rotary torque sensor : 0.1%FS (Lowest Nm=Accuracy 0.001 * Capacity)
  • 【LCD Display 】Dynamic torque sensor, power supply: DC 24V, LCD display can show torque, speed and power value at the same time
  • 【Starting Torque】ATO contactless design torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm
  • 【Customer First 】You will be enjoyed to get free tech support on how to choose, how to wire, how to commissioning with ATO professional engineers. If you have any issue about the product or service, please don't hesitate to consult us



Product Description

Digital Rotary Torque Sensor
Digital Rotary Torque Sensor
Digital Rotary Torque Sensor applications

ATO Torque Transducer Applications

ATO Torque Transducer Meter Specification

Display LCD display (show torque/speed/power value)
Non-linearity 0.1%FS (Accuracy 0.001 * Capacity=Lowest Nm)
Hysteresis 0.03%FS
Repeatability 0.03%FS
Temperature drift on zero <0.01%FS/℃
Temperature effect on output <0.01%FS/℃
Power supply DC 24V
Consumption current <150mA
Load resistance ≥2kΩ
Output torque * ±5V, 0-10V, 4-20mA, RS485, RS485 & ±5V, RS485 & 0-10V, RS485 & 4-20mA
Software Option* software and USB to RS485 cable is optional, if you select, you can install software on your computer (Win 8/ Win 10 system) to monitor torque data and graphs
Output speed 60 pulse per revolution (OC output is standard configuration, and 5V TTL output is optional)
Response performance 1kHz
Signal delay 0.6ms
Ultimate overload 200%FS
Rated speed 10000rpm
Maximum speed 15000rpm
Protection grade IP43
Maximum Deformation 0.149°/1Nm at 2.60*10rad (The maximum deformation angle generated by 1Nm at 2.6*10rad rotation arc is 0.149°)
Inertia moment 0.38x10-4 - 0.35x10-3 kg·cm2
Natural vibration frequency 19.4kHz
Torsion constant 0.833×10Nm - 3602.7×10Nm/rad
Elastic element material 17-4 stainless steel
Operating temperature -10℃~+70℃ (14~158℉)
Humidity 0~85%RH
Electrical connection 7 pin waterproof circular connector
Cable length 3m (Φ5mm)

Recommended Products