Shopping Cart

Your cart is empty.

Your cart is empty.

Black Rear Shocks - Eye/Clevis - 321mm (12 5/8') - Fits Honda CB350 CL350 SL350 CB360 CJ360 CL360 CB400 CM400 CB450 CL450 CM450 CB500 CB550 CB650 CB700 CB750

4.3 (1) Write Review
Free shipping on orders over $29.99

$89.95

$ 39 .99 $39.99

In Stock

About this item

  • All black vintage style rear shocks. These have 5 step preload adjusters just like the stock ones. Lower clevis type mount is threaded for M10 bolts. Upper eye mount already has the 14.5mm rubber bushing installed. These can be used on many of the Honda CB's and custom bikes! Remove one shock at a time and you can replace those rusty old shocks in minutes!
  • Sold as a pair. We also have these shocks with a shroud at 4into1.
  • NOTE: Please measure your existing shocks prior to ordering so you know they'll work with your application. These may be shorter or longer than the stock shocks for the models listed. They may need a washer on both sides of the bushing if there is any free play after flange nut is installed.
  • Length: 321mm (12 5/8") measured from center of mounting points.
  • Spring Diameter = 52mm (2")
  • Overall Length = 13 7/8"
  • Check fitment in description


All black vintage style rear shocks. These have 5 step preload adjusters just like the stock ones. Lower clevis type mount is threaded for M10 bolts. Upper eye mount already has the 14.5mm rubber bushing installed. These can be used on many of the Honda CB's and custom bikes! Remove one shock at a time and you can replace those rusty old shocks in minutes!

Sold as a pair. We also have these shocks with a shroud available.

NOTE: Please measure your existing shocks prior to ordering so you know they'll work with your application. These may be shorter or longer than the stock shocks for the models below. They may need a washer on both sides of the bushing if there is any free play after flange nut is installed.

Dimensions:

Length: 321mm (12 5/8") measured from center of mounting points.
Spring Diameter = 52mm (2")
Overall Length = 13 7/8"
Inner diameter Of Upper Rubber Bushing = 14.5mm
Threaded Mounting Hole: M10
Distance between clevis: 19.2mm

Fits Honda: (Reproduction of Original Style)

CB350F Four - 1972-1974
CB350G - 1973
CB350K - 1968-1973
CL350K Scrambler - 1968-1973 (with early model pipes "black cover")
SL350K Motosport - 1969-1973
CB360G - 1974
CB360K - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360 Scrambler - 1974-1975
CB400F Super Sport - 1975-1977
CM400A Hondamatic - 1979-1981
CM400C Custom - 1981
CM400E - 1980-1981
CM400T - 1979-1981
CB450K Super Sport - 1968-1974
CL450K Scrambler - 1968-1974
CM450A Hondamatic - 1982-1983
CM450C Custom - 1982
CM450E - 1982-1983
CB500K Four - 1971-1973
CB500T Twin DOHC - 1975-1976
CB550K Four - 1974-1978
CB550F Super Sport - 1975-1977
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB700SC Nighthawk S - 1984-1986
CB750A Automatic - 1976-1978
CB750C Custom - 1980-1982
CB750F Super Sport - 1975-1978
CB750K Four - 1969-1978
CB750SC Nighthawk 1982-1983


Jkemp79
Reviewed in the United States on October 23, 2020
I originally bought some performance shocks with remote reservoirs but the side-mount CL exhaust got in the way. I opted for these instead and they are identical to the original shocks from 1973. You can even use your original shock spring adjuster wrench. They perform as OE as well - not performance, but way better than the bouncy 47 year old shocks that were on the bike.