Your cart is empty.
Your cart is empty.Product Description
Daredevil spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal; hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
From the Manufacturer
Bosch DareDevil Spade Bits offer the industry's leading performance over any other spade bit available today. The DareDevil was designed to answer the needs of professional users in terms of speed, ease of use and hole quality. The DareDevil is the fastest spade bit in the industry, provides smooth and effortless drilling, and produces the cleanest hole. A first for Spades, the full cone threaded tip provides the speed needed to drill faster and it pulls the bit through the material with less effort and vibration than other spade bits.
Roger A.
Reviewed in Canada on March 15, 2025
I knew I would need a big spade bit to make holes big enough to put the electrical plug from appliances through the side wall of the shelving, And this did the job perfectly, It also helped with air-flow letting heat out &/or cool air go in
Brandon Bernhardt
Reviewed in Canada on September 25, 2024
Drilling holes for 1.5" dowels.
Umbra
Reviewed in Canada on February 22, 2024
I bought this to drill out candles for my wedding centrepieces, and it worked very well. Will be keeping it in my tools, and odds are if I need to get a different size, I’d look at another one of the same.
Mickie
Reviewed in the United States on January 13, 2022
Needed to drill a couple of holes in kitchen floor, that is 2 1/4” thick. This bit hooked up to my Milwaukee 1/2” drill made short work of the job. Topside hole.was very clean and pretty smooth. Bottom hole was a little jagged, but not bad. I would buy this bit again.
WENDY BEER
Reviewed in Canada on July 8, 2021
HAVE NOT USED YET BUT ADD INFERS 2 BITS - NOT HAPPY - MY ERROR
Marcos Alfonso Lopez Padilla
Reviewed in Mexico on January 3, 2021
Bastante sólida y filosa. Hay que tener la precaucion en usarla a las revoluciones adecuadas y sobre todo en madera dura, realmente realiza el trabajo casi sola solo hay que sujetar el taladro con firmeza es necesario el mango auxiliar y protección ocular debido a que se desbasta la madera. Excelente producto.
Another Customer
Reviewed in the United States on September 4, 2016
These Spade drill bits wear out just by being looked at funny. I prefer these self feeding bits because they last a little bit longer and continue to make holes after the bit has gone dull. Trying to drill a hole with any other dull bit is a lost cause.The only down side is when they're sharp the hole isn't very clean and the exit hole is worse. I wouldn't try drilling a stack of plywood sheets with these unless you really don't care where the hold ends up.These work best if you have to drill a hole at an awkward angle.
Presiyan Radev
Reviewed in the United States on November 8, 2015
Total junk, i'm glad i didn't buy the whole set, way too dangerous & of course the Chinese crappy steal, 3 test holes & one of the edges is already curved, very disappointed of Bosch!!!!! My Hitachi set is way better, the only reason i bought this is because i needed one bigger than 1in, which was not included in the other bit set.
Andrew Wade
Reviewed in the United States on August 22, 2014
These drill bits are so aggressive that it's easy to lose control of the drill depending on what kind of wood you're drilling into.Probably great for the right application but if you're drilling into something that's not bolted down it can get crazy.
Lane Baze
Reviewed in the United States on June 4, 2014
I used this to bore through some wood drawers and it just ripped right through. I would definitely buy this brand again because I have used many different brands of bit and few perform as well as this one.
Brian and Val
Reviewed in the United States on October 31, 2014
This is one solidly engineered tool! Simply put if your goal is to create a hole through wood quickly, this is your bit. If your goal is to drill to a certain depth and stop, this might not be your first choice.The center screw bites quickly and pulls the bit into the wood without the ability to control the speed. This could be dangerous if you don't have a good grip on your drill or the proper leverage like hanging off a ladder or working in an awkward position.If I was using a corded drill and was drilling through studs in a house this would be my first choice hands down. I was using it to drill through driftwood only an inch or two then stopping and its impossible.TIP- If you need to slow the bit take a grinder and take down the edges of the screw piece slightly and you will still have a sharp fast bit but will have control over the speed.
slow reader
Reviewed in the United States on January 17, 2014
I got this bit to make holes in fresh pine log. This bit really works. The only thing i had to do it bring my corded drill. Battery on my portable drill is too weak.
Howard Hotard
Reviewed in the United States on March 3, 2010
This bit went above and beyond my expectations. Easy to use, stays sharp, saved me a lot of time. It is not a hole saw so you need to be careful of doing damage depending on the type of material you are cutting. What a great addition to my tool box.
Recommended Products
