Shopping Cart

Your cart is empty.

Your cart is empty.

BQLZR High Conversion Efficiency 60W 40KHz Ultrasonic Piezoelectric Transducer Cleaner

Free shipping on orders over $29.99

$24.59

$ 12 .99 $12.99

In Stock

About this item

  • amplitude, Piezoelectric ceramic materials provides good heat resistance
  • High mechanical value, high conversion efficiency. be able to visibly see waves when the power is quite high.
  • Large amplitude.Product material is aluminum alloy
  • it should be bolted to the outside of the tank
  • You'll need to build a signal generator/driver to make use of this.
  • Solder the wire to the lug. The middle lug is positive, while the lug closest to the metal horn is negative.
  • The larger end contacts the oil tank. Its threaded hole is screwed in with a small removable stud.
  • High mechanical Q-value, high conversion efficiency
  • Large amplitude



Product Description

High mechanical Q-value High mechanical Q-value, high conversion efficiency. be able to visibly see waves when the power is quite high.
Large amplitude .Product material is aluminum alloy
aluminum alloy Product material is aluminum alloy
be bolted to the outside it should be bolted to the outside of the tank
build a signal generator You'll need to build a signal generator/driver to make use of this.
Frequency 40KHz
Power 60W
Weight 306g
Package incude 1x transducer

Customer
Reviewed in the United States on March 17, 2024
They’re bend completely flat against the transducer. Had to bend back up which now shows visible stress on the metal, will have to be careful so they don’t snap.
Danny B.
Reviewed in the United States on April 27, 2024
works better then they said and i got to say as far as Amazon returns i give them 10 out of 10 been very happy with them.
Dake Hymer
Reviewed in the United States on December 24, 2023
The transducer is a little smaller than the original. So far so good is working. Knocked the old one off with a hammer and JB welded the new one on. This was the P/N 63256 cleaner.
cupajoe
Reviewed in the United States on October 25, 2023
The basic specs were the same (60W 40KHz) and this transducer looks to be the same size and shape as the one in the ultrasonic cleaner.It can probably act as a direct replacement, but I intend to build a simple cleaner with less volume, in order to increase cleaning power.Just two wires go from the generator circuit board to the transducer. Perhaps just those two wires can be disconnected and extended to the new cleaning unit... also the AC grounding wire...As for the cleaner's timing and heating functions I can probably do without them. But it's gonna take some study, thought, trial and error...
Andrew G.
Reviewed in the United States on April 21, 2019
I purchased two 40KHz transducers. Shipment took 10 days. Received one for 40KHz (Rank C), another one 28KHz (Rank D).
gfang
Reviewed in the United States on July 25, 2018
You'll need to build a signal generator/driver to make use of this. If you have an oscilloscope you can fool with the input wave until voltage and current are at resonance. 40k at 60watts is perfect for stifling dogs at a pretty great distance.Or you could build the similar circuit and use this for it's intended purpose...up to you.
Sgt. B.
Reviewed in the United States on January 14, 2017
Excellent product and service!! Thank you!!
Mike R.
Reviewed in the United States on October 5, 2015
Worked as expected!
Recommended Products

$68.74

$ 31 .99 $31.99

4.3
Select Option

$10.50

$ 4 .99 $4.99

4.6
Select Option

$48.99

$ 23 .99 $23.99

4.6
Select Option