Your cart is empty.
Your cart is empty.Product Description
Yuesstloo Camshaft Alignment Locking Timing Tool Kit
Used to remove and install the engine timing and adjust the camshaft of FSI and TFSI 2.0L engines.
Application:
- Compatible with VAG 2.0 FSi petrol engine from 2003.
- compatible with Audi A3 2.0 FSi and Fsi SOHC, engine code: AWA, BHD, BMB;
- compatible with VW Golf 2.0 FSi and 2.0 FSi SOHC and Touran 2.0 FSi SOHC, engine code: AWA, AXW.
OEM Equivalent Part Number: T10252, T10020, T10115, T40011, T10060A, 3366, T40080, T52.
More Comprehensive Tool Set
Package Includes:
- 1 x Camshaft Holding Tool
- 1 x Tooth Belt Tensioner Wrench
- 1 x Chain Tensioner Retainer
- 3 x Tensioner Locking Pin
- 1 x Chain Tensioner Retaining Screw and Nut
- 2 x Tensioner Bolt
- 1 x T52 Polydrive Head Bolt Socket
- 1 x Camshaft Adjuster Socket
Comes with a carrying case and a pair of gloves, convenient to carry and store.
Made of high quality steel, high strength, corrosion resistant, wear resistant.
T10020
2 Pin Spanner Tooth Belt Tensioner
T10252
Camshaft Holding Tool
3366
Chain Tensioner Retainer
T52 Polydrive Cylinder Head Bolt Socket Tool
- Total length: 200mm, 1/2" Drive, 6-Point, M10.
- Used to remove and install the cylinder head bolts on VW and Audi.
- Compatible with VW and Audi models.
- Compatible with Jetta, Beetle, Passat, A4, A6, TT, etc.
Camshaft Adjuster Socket T40080
- Total length: 55mm, 1/2" Drive, M10.
- Used for the camshaft adjuster locking bolt.
- Compatible with VW Audi 2.0T Belt Engine.
- OEM Equivalent Part Number: T40080.
- Engine Type: BPJ.
Brennon
Reviewed in the United States on February 2, 2025
All in all, the important bits are all there for a 1.8t VW timing chain job. The retainers for the tensioner are cheap metal, bent almost immediately. Unusable. The pins on the harmonic balancer holder arent long enough to actually hold itself on, so as soon as torque is applied to the HB bolt, the counterhold wants to just twist off. You have to hold the counterhold to the HB, prop the counterhold on a jackstand, and also loosen a very tight bolt. Couldve been better, but usable. Everything else worked as expected.Only thing it *couldve* included was the exhaust cam holder, since it included the intake one. Used a pair of 90⁰ needlenose in place of it though.
Cristian Ramirez
Reviewed in the United States on February 13, 2025
Excelente
James Mitchell
Reviewed in the United States on February 1, 2025
I bought an Audi that the engine had suffered catastrophic. Cam chain failure. I bought this kit to repair it and get the timing right. It worked well
Eric L. Joaquin
Reviewed in the United States on September 9, 2024
This is a complete kit and has everything you need to replace your camshaft timing chain. I like that it has the 9mm polybit socket in both short and long formats. I used the short socket so I have better control when removing the bolt. Everything in this kit feels solid.i found it useful to slightly loosen the hex bolts holding the locking tool posts before fitting it to your engine. Once in, tighten it back to keep your camshafts locked in place.
Josh brown
Reviewed in the United States on June 24, 2024
Tool worked great looks good and box matching with my other timing tools
Recommended Products
$76.99
$ 30 .99 $30.99
$58.59
$ 29 .99 $29.99