Your cart is empty.
Your cart is empty. *The Specifications of the motor:
Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM.
Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM.
Starting current: 4-5A;
Power: 100W-200W;
Motor Body Diameter: 42mm ;
Motor Body Length: 66.5mm;
Shaft Length: 16mm;
Shaft Diameter: 5mm?
*The specification of the speed controller:
Input Voltage: DC 10V-DC 60V (Ultra wide working voltage);
Output voltage: linear under load;
Control Power: 0.01-1200W;
Rated Current: 10A;
Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.);
PWM Duty Cycle: 0%-100%;
PWM Frequency: 25Khz;
Product Size(L x W x H): 77*45*28mm;
*The Specification of the Bracket:
Length: 50mm
Width: 52mm
Height: 53mm
Mounting hole diameter: 4mm
Thickness of bracket: 3mm
*Attention:
1.Please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out.
2.This speed regulator is for use with DC brushed motors. It is NOT suitable for speed regulation of DC brushless motors; nor can it be used as a voltage regulator or voltage stabilizer!
3.Positive and negative pole of the POWER and the MOTOR can NOT be reversed.
calvin hunner
Reviewed in the United States on April 22, 2025
difficult to clear motor from the deck to get the most cut , i had made this a table saw for both 12 and 24 volt . i live off grid . a great motor saw , and very power full. this bad boy is the ultimate tiny saw .
LIONSTRACS
Reviewed in Italy on September 28, 2024
The media could not be loaded.
Willie Lugo
Reviewed in the United States on July 13, 2024
Great performance
Jose L.
Reviewed in Spain on May 6, 2024
todo perfecto
Randy
Reviewed in the United States on May 18, 2024
I made something like this years ago that attached to my yard tractor for cutting small bushes that my weed wacker couldn’t handle. This is very similar to that. The quality of the parts looks good. The bracket is thick and the motor mounts securely. The adapter fits good and tight on the motor shaft, I don’t expect any wobble or for it to ever come off. I don’t have it mounted yet but it looks like this will work great for what I have planned.
Dari
Reviewed in Italy on July 22, 2023
Ottimo prodotto, funzionamento perfetto. Costruito piccola sega da banco con poca spesa. Alimentato con alimentazione variabile 0-12V, 8A, sostituito lama con una specifica per i miei lavori e taglia perfettamente.
Fragiacomo G.
Reviewed in Italy on May 10, 2023
Avendo già acquistato il motorino( neanche tanto ...uno, viste le prestazioni) sono sicuro che questo kit soddisferà oltre ogni mia aspettativa le mie richieste. Da acquistare ad' occhi chiusi😜specialmente se in offerta.
Etienne
Reviewed in the Netherlands on December 23, 2023
Verry good for "Small" DIY woodcraft and can cut thin metals with the right Blade, all in all NOT BAD !!!Seller recommended for good service.
Rodger wagoner
Reviewed in the United States on November 17, 2023
I used it to replace the motor on a electric weed eater. Very powerful cuts through 2 inch thick saplings in one wack
Robert Halderman
Reviewed in the United States on April 23, 2023
came with everything I needed.
R
Reviewed in the United States on August 5, 2021
This motor and saw is working great with12v, Not using to cut wood though. The first one received had a broken magnet but it was quickly replaced, even before returning the bad one.
Mac
Reviewed in the United States on April 6, 2021
Works ok
D.J.Heu
Reviewed in the United States on December 18, 2020
Well first off the threads do not match. Ones a finer thread than the other so it is worthless right off the start.
Recommended Products
