Shopping Cart

Your cart is empty.

Your cart is empty.

Clamp Meter CM2100 OWON Digital Meter AC/DC Tester 20,000 Counts with True-RMS Test Capacitance Resistance Diodes Continuity NCV VFC Function

Free shipping on orders over $29.99

$39.99

$ 17 .99 $17.99

In Stock

1.Style:Cm2100


About this item

  • Details:Small size (7.2x2.2x1.2 inch), lightweight(device:0.2kg), built-in battery(2pcs x 1.5V AAA), Jaw Capacity(17mm); Space saving and easy to carry for use anytime and anywhere; 20,000 counts display,AC frequency response up to 1,000Hz.
  • Small size but all-in-one: Support AC/DC current and voltage test, capacitance, resistance diodes, continuity, NCV, VFC, overload protection with true-RMS test. LCD backlight function; Duty cycle measurement; Hold reading mode; Automatic range; Automatic shutdown(optional).
  • Features: CM2100 clamp meter is characterized by high reliability, safety, accuracy. Its resolution reaches 1mA and the maximum range is 100A AC/DC.This product has unique VFC start-up mode and can accurately measure the voltage and current of VFC after entering the mode. It has full range overload protection, reliable measuring precision.
  • True RMS: Accurately measure the effective values of various waveform in real time,no need to consider waveform parameters and distortion. It can accurately measure/process the AC current/voltage of sine wave signal during the trouble shooting or performance testing and analysis of power system.
  • Cautions: Use the proper terminals, function and range for your measurements. Selecting the auto ranging mode or rotary switch on Max. range when the magnitude range of the measured value is Indefinite. To avoid damages to the clamp ammeter, do not exceed the maximum limits of the input values shown in the technical specification tables.



Product Description

CM2100 Clmap Meter

CM2100

  • AC/DC current, AC/DC voltage
  • 20,000 counts true RMS automatic range clamp meter
  • Standard non-contact AC voltage sensing (NCV) function
  • VFC mode can filter high-frequency interference signals to ensure accurate measurement data
  • AC frequency response up to 1,000Hz
  • Small size and lightweight, easy to carry

Multiple Measurement Function

CM2100

CM2100 Parameter

Functions Current/Voltage/ Resistance/Capacitance/Frequency /Duty Cycle/etc.
AC/DC Current 100A
AC/DC Voltage 600V
Duty Cycle (%) 0.1% - 99.9%
Display 20,000 counts
Frequency Response 40Hz~1000Hz
Auto Ranging/Date Hold
Jaw Capacity 17mm
Diode/ Continuity Buzzer
NCV/VFC
Zero /Low-battery Indicator
Relative Measurement
Input Protection
Overrange Alarm/On-off Warning
Input Impedance ≥10MΩ
Battery 2 x 1.5V AAA

eHackster
Reviewed in the United States on December 5, 2024
This clamp meter supports both AC and DC currents, and has a 20K count display. It's light-weight and is relatively small compared to other clamp meters. Overall, it's a good clamp meter with decent build quality.
Crash Override.
Reviewed in the United States on July 5, 2023
Superb little clamp meter from an excellent company. Note - this is not the Bluetooth model, that is the CM2100B so even though the bottom image shows bluetooth, this does not have it. It is however invaluable for troubleshooting things like parasitic drain on a vehicle and power usage in the home. With a clamp limit of 100A it isn't suited to starter circuits (120A and up) but it will do most things.
Scoobis
Reviewed in the United States on July 17, 2023
I set a high bar for this OWON meter and it beat all my expectations.first, i did an accuracy test against a 120,000 count meter that was in calibrationclamp meter, the reading was within 0.39% .. pretty amazing for a DC clamp meter.voltage readings were within 0.08%resistance readings were within 0.4% or better depending on scalecapacitance readings were in the .024 %I did further test but in short, it beat all its documented specs on accuracy on anything it tested.note that it also has a diode test function that worked well against the silicone diode I tested with.the frequency test was right on target.The meter backlight is not very bright.that the continuity tester is not latching and is a little laggy making it hard to use it to find intermittent shorts.the NCV is not very sensitive and did not detect active voltage on my power strip for example.it has two cat ratings of 300v and 600v. so good for most AC usageThe probes were ok, but not top quality. they have probe covers for tight spaces just leaving the tips exposed.The meter is light and smaller than your average clamp meter, .. and comes with a nice case that fits the probes along with the meter. nice for daily carry.This is a good all-around clamp meter that goes a little further than most clamp meters go.if you judge this against other clamp meters it's an a+ but with all the other features you are tempted to judge it against non-clamp meters and even thin, with 20,000 counts and accuracy it would fair very well also.