Your cart is empty.
Your cart is empty.Product Description
Which location would be best?
Ideally, just behind the rear view mirror. This is the one area of the windshield that is already usually blocked. So, if you install just behind the rear view mirror, you don’t block any additional viewing area, which is perfect.
Also, for best results in terms of view angle, when installing take into consideration that the camera is placed right under the rear view mirror handle. This is more or less the center of the windshield. This will ensure that the central view looking out of the windshield will cover the all of the road in front as well as the bonnet of the vehicle you are driving, which is key if you have a car camera with a relatively cheap dash cam with a low view angle of say 140° or less.
Come with 16 different joints, suitable for 95% dash cam.
- Never Fall Down From The Windshield.
- Strong Pipe Mount
- 360° Rotation Freedom
- Anti-Skidding and Protectiveness
NOTE: Only compatible with domestic vihicles with mirrors that have a cylindrical shapped stem at least 0.4" long
Widely Applicable models
Come with 16 different joints, suitable for AUKEY, Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.(Including but not limited to).
Easy to install and remove
Tool-less and easy to install, the product can be installed or removed within minutes thanks to the thumb screws
Easy angle adjustment
Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need.
Specification:
Material: Plastic and rubber
Weight: 4.9 oz
Clamping Diameter range: 0.5- 2.6 inches
Ultra-slim 9.20mm design to suit 94% car rear view mirror.
Real 360-degree rotation design, adjust to any angle you need.
Solid, high-quality workmanship way
Stable and secure mounting
Position fixing with practical locking nut
All connectors and controls remain accessible .
Terrence R Works
Reviewed in the United States on March 27, 2025
This dash cam mount holds my camera securely in place, even on bumpy roads. Easy to install and adjust for the perfect angle. Great quality and stays put—highly recommend!
Canine
Reviewed in the United States on March 22, 2025
If your camera has power going through the suction cup this item does not work for you. The ventrue on dash and four three-channel dash cam it does not work for you due to the fact that your power is going through the suction cup. These items do not, DO NOT supply any power to your camera. This item doesn't work for me at all so even though it was put as a bundle that it would work which is why I bought it that's a lie.
@frhetoric85
Reviewed in the United States on March 2, 2025
The mount for my dash came broke off, so I thought I was screwed and was going to have to buy a new one. Lucky for me I checked online and found this beauty. It was a sucker to get mounted, but I doubt it will be moving on me any time soon. It's mounted to the rear view mirror, so no suction necessary. Comes with a variety of adapters for various dash cam adaptability. Enjoy`
Customer
Reviewed in Canada on February 7, 2025
My dashcam suction cup kept falling but this product has helped a lot and is good value.
Brianna
Reviewed in Canada on February 5, 2025
Not super high quality, but does the trick and comes with many attachment options for different cameras. Was tired of my camera falling off my windshield with the suction mount it came with and this replacement mount is working great and keeps the camera up near my rear view mirror :)
Kat
Reviewed in the United States on February 27, 2025
This worked so great for our Miden 2K Dual Dash Camera for Cars, Free 64G SD Card, FHD2K+1080P Dash Cam Front and Rear, 3.2" IPS Screen, 176° Wide Angle Dashcam, 24H Parking Monitor, G-Sensor, Loop Recording, Night Vision, WDR.The suction piece that came with it originally was toast in the Vegas heat after 2 months. This had all the right parts, easy to set up, and is such a better angel for view with the camera. 10/10
Toast
Reviewed in the United States on April 23, 2025
Suction cup on my Nexar Beam dashcam stopped sticking to my car so i ordered this I saw many reviews confirming that it works with a "Nexar dashcam" but wasn't sure if that meant the Nexar Beam or not. Glad that it works and hopefully wont have any problems in the future.
سعيد المالكي
Reviewed in Saudi Arabia on September 12, 2024
ممكن مناسب للبعض بس ماعجبني مو نفس الي توقعت والقواحد ماتجي صح
Raheela
Reviewed in Canada on November 30, 2024
I have used velcro, Krazy glue on my windshield to keep my dash came in place. Always falling after a few days.Finally, I have found this, and I can drive with peace of mind worrying about falling dash cam.Easy to install, comes with so many options depending on what dash came you have.I am glad I bought this.
GoForLaunch
Reviewed in the United States on November 15, 2024
Either use the original adapter from the suction cup mount for the camera along with the smaller "U" shaped adapter from this kit, or there are 2 other adapters which are compatible with the mounting hole of the camera. I chose to use the "U" shaped adapter to give me a little bit more flexibility and precision for the angle at which I wanted the camera to be set at - it gives just a little bit more reach so I can position the camera closer to the windshield. I also used the rubber strap provided to help the clamp grip better on the rearview mirror assembly. Once every thing is tightened down it is very solid - I have no concerns about it loosening or shifting.This universal kit seems to have enough adapters to cover a very wide range of cameras and setups. Except for the screws and wing nuts everything else is made of some kind of composite plastic - it seems durable and should endure the hot summer and cold winter temperatures. There is a bit of concern about mounting an additional item onto the rearview mirror assembly, like it might over load the OEM mount... but we won't know until something happens to it.Based on my needs for compatibility with the COOAU D30S 4K Dash Cam I can highly recommend this kit. Your mileage may vary for other cameras but there are enough adapters that you could rig something together. Give this a try... you can always return it if it doesn't fit.
Ty4tehreply
Reviewed in the United States on October 7, 2024
Some dashcams have the placement of where the USB goes into it above the camera itself, unfortunately mine is one of those. This makes it tricker to set properly, looked for alternatives and the best I could think of was getting longer screws. My Tacoma also has a girthy mirror shaft so that also took space away from the screws they had sent. I got 3" screws at the hardware store and they worked but I can't adjust the mirror anymore. I wish they placed these 3" screws themselves and give me less of the joints that are essentially trash to me.
bearsybear
Reviewed in the United States on October 16, 2024
Yay, no sticky residue on my dash or my windshield. Enter the dash cam bracket. Game changer.Came with an abundance of different mounting options to fit your particular camera. There were two that were close and could work, but then I found the one that fit perfect and even snapped into place.It took a hot minute to install this puppy by myself, I kept thinking I needed a third hand. But, after some time I figured it out and got the bracket installed on the back of my mirror.TIP: There are FOUR (yes, four) stages to installing this. First figure out which of the 16 choices of brackets match your camera. Second, install the mounting bracket with the flywings onto the back of your mirror. Third, attach the bracket (from stage one) onto the mounting bracket. Fourth, attach the camera to the bracket. Whew! Took me about 1 1/2 hours, because I had a HUGE learning curve to figure this out, LOL.Once installed and everything was screwed tight into place, this thing HOLDS your camera with no shaking. Camera is perfectly centered with no adhesion that can leave sticky residue or even come off in super hot weather. It's a must if you have your windshield tinted.
Abdullah Bugis
Reviewed in Saudi Arabia on March 28, 2022
الذي احببته وجود عدة قطع اخرى مرفقة اعتقد للاستخدام مع انواع مختلفة من الكميرات وكان يفضل ارفاق كتيب مشروح بذلك
Recommended Products