Your cart is empty.
Your cart is empty.Mike S.
Reviewed in the United States on September 30, 2021
I ordered what was is the picture, the 0 degree and I received the 10 degree.
Abby K.
Reviewed in the United States on November 24, 2020
Didnt receive the right one.
Will Schultz
Reviewed in the United States on October 27, 2020
quick to attach to bow and the quick attachment for the stabilizer works perfectly!
Eric Kimminau
Reviewed in the United States on May 15, 2019
Great quick disconnects for Compound or recurve. They stay solid and tight.
John Smith
Reviewed in the United States on September 28, 2018
I have a pile of the 0 degree (straight) version of this quick disconnect (QDC) for the family's bows and just now got the 10 degree one to experiment with for freestyle. These are well made and will work with any stabilizer that has a standard 5/16"-24 mounting stud. The distinguishing feature of this particular QDC is the pin that screws onto the stabilizer stud. It has a rubber dot in its threads that serves dual functions: keeping the stabilizer from loosening while attached to the bow, and keeping the pin itself from unscrewing and falling off the stabilizer stud when the stabilizer is detached from the bow. No more fishing around the bag to find it! Couple of things to keep in mind:1) Amazon's listing for this at the time of this writing is confusing. The "black" is the straight, while the "matte black" is the 10 degree. Go by the photo which should change as you select one or the other.2) NFAA rules. If you intend on shooting Bowhunter class, you must use the straight version of this QDC as the current set of rules stipulates that a stabilizer in that class must be straight. Using the 10 degree version will put you in Freestyle class.
VMO1mech
Reviewed in the United States on September 12, 2018
It looks good but fit and finish is sub par. First off the treads on the retention pin had debris from manufacturing witch made it gall up my stabalizer threads. After I chased the threads on both my stabalizer and the retention pin I mounted the stabalizer back on to my bow took a dozen shots and found that the stabalizer was coming loose. After further inspection I found that the stabalizer does not fully seat up against the adapter at the 12 o'clock position. To me this means that it'll always have a loosening problem. This may be a isolated case but I have been quite happy with the Bee Stinger version of this product.
jesse donald gardner
Reviewed in the United States on May 26, 2017
Love this so much better than other disconnects
Sal M.
Reviewed in the United States on July 23, 2016
This was purchased for quick on/off of the stabilizer for me daughter's compound competition bow. In seconds tge stabilizer is on and off the bow. Highly recommend this for anyone not wanting to have to screw on and screw off your stabilizer. A must have product for ease and speed.
Recommended Products
$199.93
$ 92 .99 $92.99
$19.99
$ 8 .99 $8.99