Shopping Cart

Your cart is empty.

Your cart is empty.

ETCR6000 Current Tester, AC DC Clamp Leaker Leakage Current Tester 0mA‑60.0A 99 Units Digital Clamp Meter

5.0 Write Review
Free shipping on orders over $29.99

$120.79

$ 49 .99 $49.99

In Stock

About this item

  • The gear is automatically shifted throughout the whole process, which is convenient for measurement. The test method is a clamp‑on CT non‑contact measurement method.
  • The winding head demonstrates high , with an accuracy of ±2%rdg±5dgt, which makes the measurement more accurate.
  • Slender jaws, jaw size up to Φ7mm, adapt to enhanced and higher resolution.
  • The knob is set to zero, and the anti‑interference is enhanced. It supports data retention, overflow display, automatic shutdown, battery voltage.
  • Milliampere leakage meter, can measure AC leakage current, DC leakage current, accuracy 1mA, range 60A.


Product Description

1110210015811-1

ETCR6000 Current Tester, AC DC Clamp Leaker Leakage Current Tester 0mA?60.0A 99 Units Digital Clamp Meter

YT


The gear is automatically shifted throughout the whole process, which is convenient for measurement. The test method is a clamp‑on CT non‑measurement method.


The winding head demonstrates high , with an accuracy of ±2%rdg±5dgt, which makes the measurement more accurate.


Slender jaws, jaw size up to Φ7mm, adapt to enhanced and higher resolution.

1

1110210015811-2

1110210015811-3

1

1110210015811-2

1110210015811-3


Spec:


Item Type: Leakage Current Tester


Material: ABS


Model: ETCR6000


Measurement Function: AC and DC leakage current, current measurement


Working Power Supply: 6F22 9Vx1(Not Included)


Test Method: Clamp-on CT, non-measurement


Jaw Size: ?7mm


Range: 0mA~60.0A AC/DC


Resolution: 1mA AC/DC


Accuracy: ±2%rdg±5dgt (23?±5?, below 75%rh)


Display Mode: 4-digit LCD display


Sampling Rate: 2 times/sec


Frequency Response: AC 45Hz~400Hz


Polarity Indication: Automatic recognition when DC current is detected, display - sign.


Wire Position: The wire to be detected is at the center of the jaws


Shift: Fully automatic switching


Line Voltage: 600V and below line test


USB Interface: With a USB interface, the stored data can be uploaded to the computer, saved and printed.


Communication Parameters: Baud rate 9600, data bit 8, stop bit 1, parity bit NONE


Support Functions: Data retention, overflow display, automatic shutdown, battery voltage.


Working Current: 10mA


Working Temperature and Humidity: -10?~50?; below 80%RH


Limit Temperature Error: -10?~0? and 40?~50?, the maximum error increases by 2%rdg


Storage Temperature and Humidity: -10?~60?; below 70%RH


Insulation strength: AC 3700V/rms (between core and box)


How to Use:


Take the product, open the back cover with a tool, install the battery, and the user can adjust the measurement range, and then you can use the measurement. The right knob is used for zero adjustment, which has enhanced anti-interference and better calibration to zero. HOLD is the data holding key. It is very convenient to measure by simply putting the wire into the jaws.



PackageList:


1 x AC/DC Leakage Current Meter( Battery not Included)


1 x CD


1 x USB Data Cable


1 x Manual



1 x Bag