Your cart is empty.
Your cart is empty. Wig Wag Headlights for Diecast and RC Emergency Vehicles
This Wig Wag has 5 settings:
- Steady On
- Slow Flash
- Medium Flash
- Fast Flash
- Strobe
The lights go bright-dim to simulate a real emergency vehicle, NOT a simple on-off flash circuit.
Press the switch once for steady on, a second time for 2nd pattern, etc. 5th press turns it off. There is no auto-shutoff.
You can watch a video of the wig wag near the reviews section of this listing, or by searching “Evan Designs wig wag LED headlight circuit“ on YouTube.
Dimensions: (see photos)
The Circuit Board is 1" long, 0.55" wide, 0.35" thick including the shrink wrap.
The 4 Cool White LEDs are each wired 8 inches from the circuit board.
The switch leads and power leads are 13 inches long.
The standard 3mm LEDs are 3mm wide by 5mm long.
Powering your wig wag circuit:
The wig wag can be run on a 9 volt battery using the included battery strap, or on any 9-12 volt regulated DC adapter.
Mounting the LEDs:
The LEDs can be glued into position using any clear-drying modeling glue. You can also use double sided tape, gorilla tape, zip ties, velcro, etc. to secure the LEDs. Do NOT use hot glue as the temperature can damage the diodes inside of the LEDs.
100% Satisfaction Guaranteed! If you have any issues, please contact us so we can make it right! We offer a 2 year manufacturer's guarantee on all of our products!