Your cart is empty.
Your cart is empty.Product Description
4Pcs C-Type 0-4" Outside Diameter Micrometer Accuracy 0.0001"
0-4" Outside Diameter Micrometer
- Micrometer Ranges: 0-1", 1-2", 2-3", 3-4"
- Feature: Clear easy-to-read graduation, accurate to 0.0001"
- Material:Hardened and ground spindle with carbide anvil ensure durability and accuracy
- Details: Powder coated baked finish, fitted wood padded case, adjustment wrench and calibration standards
- Design: Ratchet handle and solid casting frame for precise application of force, lock nut
Zero Setting
- Before using, clean measuring faces of the anvil and the spindle with soft cloth or soft paper.
- Then bring them together carefully by turning the ratchet stop.
- If the line marked "0" on the thimble does not coincide with the reference line on the sleeve.
- Adjust zero position in the following manners:
Deviation within +0.01mm
- Lock the spindle by the locking device then adjust the sleeve with a spanner until the reference line comes exactly in line with "O" line on the thimble.
Deviation over 0.01mm
- Lock the spindle with a locking device and release the ratchet stop with a wrench. Press the thimble onto the ratchet stop so that the "O" line coincides with the guide line on the sleeve. Tighten ratchet stop for final adjustment. Use the previous method if necessary.
Reading
- Min reading is 0.01mm.
- Reading is 5.88mm. (see fig.)
- (Can estimate 0.001mm-0.002mm)
Precautions
- Keep the instrument clean and dry.
- Do not disassemble and drop the instrument.
- Use ratchet stop to keep precision measuring.
Michael Hayward
Reviewed in the United States on March 27, 2024
The headline indicating that this can measure down to a ten-thousandth of an inch is false. It only measures to the hundredth of an inch, which is a HUGE difference. I would give it a good rating if they were just honest in the title, they seem fairly well made, just not as precise as the title would lead you to believe.
J2019
Reviewed in the United States on November 18, 2024
The first set that I got was damaged, but they quickly sent me a second set and I’ve had no problem out of those. I have used them on several different engine rebuilds.
jwzumwalt
Reviewed in the United States on August 16, 2023
The precision and feel are what I expected and this had the best price I could find.
Linda Zinninger
Reviewed in the United States on September 20, 2021
Nice enough gauges for the price but not metric. Measure in inches, not mm.
Steve
Reviewed in the United States on August 6, 2020
Wooden case has damage. One piece is broken/completely split (first picture), likely because one of the micrometers was too large to fit in the slot made in the foam insert for it (last picture).
Customer
Reviewed in the United States on August 30, 2020
These are reasonable quality measuring tools. Some people may say they're "cheap", but I'm not building a space shuttle, and they're holding their accuracy.I would give 5 stars but dang, I needed them in metric (like the description says)
Maxim P.
Reviewed in the United States on July 27, 2020
This set is not a 0 to 6 inch as advertised, it's 0 to 4. The whole point of the purchase was that 6 inch micrometer, great.
Dst
Reviewed in the United States on May 12, 2020
Its completely accurate, the only issue I've had is both seating surfaces don't align perfectly when the tool is calibrated as the expensive brands do.
Recommended Products
$217.20
$ 99 .00 $99.00
$141.65
$ 69 .99 $69.99
$111.32
$ 51 .99 $51.99