Your cart is empty.
Your cart is empty.Rear Lowering Kit - F150 2015-2020
Ray Ray
Reviewed in the United States on September 26, 2024
For my 2017 ford f150 rear wheel drive. Got a little over 1” drop on both sides. Great solid product. Came packaged and sealed with all parts and instructions that you will not need other than the torque values listed. Check out videos online for proper install. Does not hit bed frame and no cutting needed. Few suggestions 1 remove left and right and spare tire for easy access and mark the u bolt and leaf suspension for installation (front, rear, left and right sides of the leaf suspension). 2 jack up the rear diff all the way up till the rear top shackles clear the subframe. 3 you will need a hammer and punch to hammer out the rear top shackle bolt from the leaf springs. 4 install shims last, thick side to the rear. Installation can be found online for install. Don’t be afraid to jack that diff.
Richard B.
Reviewed in the United States on July 24, 2024
This kit fit my 2024 F150 supercrew. kit sold to fit 2015 to 2020 F 150. works just fine on my 2024 F150.
AJ
Reviewed in the United States on December 28, 2023
This kit lowered my 2016 F150 4WD 2 inches. There are plenty of you tube videos to show you how to replace the kit. The best video was on American trucks. There is nothing to cut, common sense and let the jacks do the work
Ricky
Reviewed in the United States on June 14, 2022
Used it on my 15 f150 supercrew 2wd everything works perfectly rides just like before everything comes with kit
JB
Reviewed in the United States on August 30, 2020
I removed the OEM installed shackles and installed these to lower the back of my 2020 F150. Reason, well I have the tailgate step option and needed a step to get on the tail gate installed step. The M-3000-HA advertised 1.5 inch lowering but I actually got 2.5 inches. Luckily I could accommodate that additional inch. I am still pitched up by 1.5 full inches front to back [ back being Up higher than the front].
Recommended Products