Shopping Cart

Your cart is empty.

Your cart is empty.

FrSky TFR6A TFR6-A 2.4GHz 7 Channale Receiver FASST Compatible Futaba T14SG T8FG Module for Remote Control FPV Drones (TFR6-A)

5.0 Write Review
Free shipping on orders over $29.99

$38.58

$ 19 .99 $19.99

In Stock

1.Style:Tfr6


  • Lighter weight and smaller size;Two selectable fail-safe settings.Compatible with all Futaba FASST 2.4G control and modules (except gun control, such as 3PK, 4PK).Compatible with FrSky TF module (TF-8M, TF-14M)
  • Code matching process:Turn on the control, press and hold the F/S button of the TFR6 receiver and connect to the power supply. When the red light on the receiver is off and the green light is on, it means that the code is successfully matched.
  • The TFR6 receiver has two optional fail-safe options: one is the fail-safe setting of the compatible controller itself, and the second is the fail-safe setting on the TFR6 receiver.Use the original out-of-control protection settings on the control:If the runaway protection on the original control is not turned off, TFR6 will use the runaway protection of the control itself. ​​​​​​​
  • Set the runaway protection on TFR6:TFR6 supports full-channel out-of-control protection. The following are the steps for TFR6 to set the fail-safe protection:After the TFR6 receiver has successfully coded, enter the control setting menu and turn off the original runaway protection setting on the control;Set any value of out-of-control protection on any channel of the TFR6 receiver;
  • Press and hold the F/S button of the TFR6 receiver. When the green light on the receiver flashes twice, it indicates that the fail-safe setting is successful. If this out-of-control protection is no longer needed, just re-code the code.If the original runaway protection on the controller is not turned off, TFR6 will give priority to using the runaway protection on the controller.


Item:Frsky TFR6 TFR6-A Receiver
Parameter:
Number of channels: 7 channels
Voltage range: 3.5V~10V
Size: 37mm*22mm*8mm
Weight: 7.8g
Receiver mode:
Red light Green light Mode
Off On Normal working mode
Bright Bright waiting for code matching
Flashing Bright signal loss
Bright Twinkle Twinkle Out of control protection settings