Your cart is empty.
Your cart is empty.Product Description
GELASKA 99-9313 Snow Blower Paddles with 55-8760 Scraper 55-9300 Belt Replaces 125-1128, 55-9250, 55-9251, 88-0771
99-9313 Snow Blower Paddles
- Replaces Toro 99-9313, 125-1128, 88-0771, 55-9250, 55-9251
- Hardware for 99-9313 Paddles Includes: 8x 84-1971 Oval Screws + 4x 55-9370 Rotor Blade Spacers + 4x 321-4 Screw-HH + 1x 321-8 Screw-HH + 13x 3296-56 Lock Nuts
55-8760 Scraper
- Replaces Toro 55-8760 Scraper Blade, 780-104
- Hardware for 55-8760 Scraper Kit Includes: 3x 3229-11 Screw-Carriage + 3x 32149-2 Nut-Keps
55-9300 Drive Belt
- Replaces Toro 55-9300, 55 9300, 559300
Assembly Tool Kit Includes
- 1xT27 Torx Screwdriver Set
- 1x 11 mm Socket Screwdriver
- 1x10mm Metric L Shaped Angled Hex Socket Wrench
- 1x11 mm Metric L Shaped Angled Hex Socket Wrench
Fuel Line
- Size: ID:1/4", OD: 0.45", Length: 12"
Prime Bulb
- Replaces Toro 66-7460, 44-3100, 66-7460P, 667460
- Fits for Toro CCR 2000 Paddle, Toro Snow Blower Paddles CCR 2000, Toro CCR 2000 Snowblower Paddle, Toro CCR 2400 Paddles, CCR 2400E, CCR 2400R, Toro CCR 2500 Paddles, CCR 2500E, CCR 2500R, CCR 3000, CCR 3000 GTS, CCR 3000E, CCR 3000E GTS, CCR 3000R Snowthrowers
- Fits for Toro CCR Snowthrowers: 38181, 38185, 38185C, 38186, 38180, 38180C, 38409, 38412, 38414, 38417, 38415, 38416, 38410, 38411, 38427, 38422, 38423, 38424, 38425, 38426, 38420, 38421, 38430, 38431, 38435, 38436
James T.
Reviewed in the United States on March 13, 2025
Worked as it should. Will order again when we need one.
Sandy G
Reviewed in the United States on March 10, 2025
This arrived exactly as described. Easy install and all parts were sent as well. I like the fact that all replacement screws are provided as well. Excellent choice in picking this item.
Ratsnest
Reviewed in the United States on February 14, 2025
So I had a friend order this for his blower. The paddles were a bit difficult to put on but nothing I haven’t been thru before. They all are You have to be smarter then the paddles. But they fit nice and function. Nice. Start with the bolts, farthest to the right and left and work yourself inwards. Now for the scraper bar. It’s brittle plastic and even worse when it gets cold my friend was out blowing snow and scraper bar shattered blowing some of the pieces out of the blower. It didn’t last no three blowings. Little disappointed here. Paddles are nice, but the scraper bar is junk. Period. I’ll have to order a separate scraper bar now. And it’s never recommended to change the paddles without changing the scraper bar. So here we go again Buyer beware.
banzaiengr
Reviewed in the United States on January 5, 2025
O.K. before you make an assumption I checked the model number several times before ordering this. I've changed the rubber paddles before and knew it wasn't a walk in the park. The times I changed them before I used paddles from my local Toro dealer. I knew the nuts were starting to rust so thought this item with all the nuts to change the paddles, a few tools that I didn't really need but might come in handy if there was an odd size bolt head or nut, fuel filter and spark plug would save some time to get in one place.After removing the paddles and the scraper bar, replacing the scraper bar I began the process of putting on the new paddles. It was 40 degree in my garage so I used a heat gun to warm up the paddles to make them easier to work with. Long story short, there is absolutely no way these paddles will fit my Toro single stage snow thrower. After getting the middle and top screws in place the lower paddle holes were at least an inch from where they connect to the drive. I considered removing after having done all this work and returning the product but with just 4 more bolts and nuts to connect the paddles I opted to find longer bolts to fasten the paddles. By using longer bolts with washers on the inside of the paddle I was able to get the bolts through the drive holes and connect nuts. Will this work? Guess the next snow storm I'll find out. Don't buy this. Go to Toro and get what you need. Better yet take your snow thrower to a shop and let them wrestle with it.
Jones
Reviewed in the United States on January 19, 2025
The paddles and scraper fit my Toro 721 without issue. Would buy again. Durability only time will tell.
Doug
Reviewed in the United States on January 19, 2025
Snowblower parts worked great will buy again
Roger Khami
Reviewed in the United States on April 21, 2025
"Kit Included Things that I did not expect. Needed the Paddles and Bottom Scraper Blade. Also came with New Drive Belt, New Fuel Lines and Fuel Filter and new Spring Clamps. New Primer Bulb with Lines and spring clamps. New Spark Plug. All New and Correct Threaded Fasteners.The Machine is all Re-Fit with new parts and ready for the next season of Snow. Everything Fit Perfectly.
Katie
Reviewed in the United States on November 28, 2024
Just can't tell you how impress I was. With the included tools I know it will be a snap.
Recommended Products