Your cart is empty.
Your cart is empty. Comaptible models:
Replacement For Microsoft Surface Pro 4
Package Includes:Replacement *1
If you have any questions, please don't hesitate to contact our customer service, thanks for your cooperation !
Ariel
Reviewed in the United States on February 18, 2025
Todo está según la publicación
Jimmy Johansson
Reviewed in Sweden on January 10, 2025
Inga klagomål alls, förutom att jag måste gjort något fel vid batteribytet så datorn stänger av sig i tid och otid och dessa klisterremsor sitter för bra så jag orkar inte öppna datorn igen för att se om jag kan hitta problemet.
Juan c.
Reviewed in Spain on April 17, 2025
Se adhiere y ajusta a la perfección.
Rob
Reviewed in France on July 9, 2024
Bonne découpe des stickers.J’avais pensé acheter du B7000 pour recoller l’écran suite à remplacement de batterie mais pour un taf plus propre mettre un sticker est quand même mieux.J’enlève une étoile car c’est franchement cher
Ken
Reviewed in the United States on May 13, 2024
The tapes came in a good condition
Libither
Reviewed in Sweden on March 21, 2024
It fits like a glove, no problem at all to install the new screen.
Saponaro Carmelo
Reviewed in Italy on April 26, 2024
l'ho usato , e fa il suo dovere. Bisogna pulire bene dove lo si installa, altrimenti si stacca dopo un po'.
Juan Manuel Torres Lopez
Reviewed in the United States on October 22, 2023
Es justo lo que se necesita !!!!
Heather
Reviewed in the United States on January 19, 2023
Product did not keep the screen down. Do not recommend.
JonReviewsStuff
Reviewed in the United States on May 19, 2022
Used these to fix a surface. Easy install. Steps1. Cut the strips into individual strips, no more two strips per sheet, make them individual lanes.2. Pull part of one side off half way down on the side sticking to the frame, then pave the sticky side along the surface groove. Remove more as you pave the way down. **Keep the protective layer on the other side that goes to the glass.3. Go all around the four edges, thenif happy, once more firmly to better set.4. Check everything once over, screws all in, thermal on the cpu, everything connected.5. Test the digitizer and make sure it works, touch and screen. Test camera, wifi, blue tooth, pen, cpu fan, speakers etc. Be a shame to have to reopen to connect a cable.6. Remove the protective strip from the sticky side that binds to the glass side. Tap on the glass as you lay it down to set to get it into position and press firmly once happy to set it more firmly7. Put the clamps on the surface and wait for it to firmly set a few hours. I leave it over night sometimes.8. Clean finger prints and enjoy fixed gadget!
Ed J
Reviewed in the United States on December 26, 2022
Sticker set was complete and worked as expected. Great values for the money.
MRN
Reviewed in the United States on June 13, 2021
Way better than trying to use the clear tape method, this is already cut to fit.
Juan
Reviewed in the United States on December 18, 2021
Used this in my screen swap. Seems to hold well. No issue so far
Recommended Products
$55.00
$ 28 .99 $28.99