Your cart is empty.
Your cart is empty.Product Description
Hope of Endless Caring, Are Starting Around you. With this mind, we had our brand HECASA in 2011.
Our team of experienced engineers is dedicated to designing and manufacturing innovative products that enhance the performance and functionality of your ATV/UTV.
S. Leonard
Reviewed in the United States on April 16, 2025
Don't even waste your time or money. Very unorganized instructions, they're horrible. The threads inside the rack where the bolt thread into we're painted in, so the bolts wouldn't thread into the rack. On top of that the holes didn't line up on the rack to match the four wheeler on the rear rack. Having to return and and buy a different one. This one is bad!
W. EVANS
Reviewed in the United States on February 9, 2024
Fit on my 2015 Polaris 570. However, did take some messaging to get the bolts started. Be careful as they’re easily cross threaded it overall they’re what I wanted.
Dave
Reviewed in the United States on October 16, 2024
For a 2017 570 SP, with the four side bolts tightened down there is a 3/8" gap between the rack and rack extender. Contacted seller and they did offer a partial refund if I keep the parts and make spacers to correct fitment. They did not seem interested in figuring if incorrect part sent or why it doesn't fit.
KD
Reviewed in the United States on September 25, 2023
Fit great on 2014 Sportsman 570 EPS. Box arrived beat up with rack poking through in a few places therefore there were scratches on the rack. Easy install took less than 30 mins even with drilling front holes.
Conspiracy Theorist
Reviewed in the United States on July 28, 2023
Fit my 2019 Polaris Sportsman perfectly. Super easy to install. I wish they were a bit taller but knew the size when I ordered. The front rack had some light scratching but a quick spray of Rust-Oleum took care of that. Probably could use better padding to prevent shipping scratches.They seem pretty sturdy to last.
Scooter
Reviewed in the United States on May 14, 2023
So the instructions, like with most things coming by ship these days, are not the best, read reviews for additional installation advice, better than instructions. This won't be a 10 minute project. Start with the rear rack, easiest & straight forward, and will get you in the flow. Huck the old hardware like the instructions say. Both of my racks lined up 99% perfectly with the hole centers, but the 2 front rack & 2 rear rack mounts weren't level, they were about 1/2" from being flush with the surface, they did pull down perfectly upon tightening. You will need to drill 2 holes for the front rack, tricky because there are no marks on the backside of the cover (as the instructions indicate). I loosely mounted the front rack with the 4 side bolts, and drew 2 circles on masking tape on the cover for the forward drill points. I went 2 sizes down from the recommended 3/8" bit, figured I could always go bigger, but nailed it 1st try. I did use the original hardware for the front rack with the exception of the front 2 (drilled) shorter bolts. I hope this saves you some time & frustration. Mounted on a '16 Polaris Sportsman 570.
College-Grad
Reviewed in the United States on November 15, 2023
First I want to say that my 570 Sportsman now has that finished look. I am not a die hard ATV guy. I use it only to plow my property, but still wanted to make my Polaris look good without spending a lot of money. The brackets look great, and are secure and usable, but if I were packing for a hunting trip and needed these racks to hold my heavy gear, I would definitely spend the money and get heavier duty brackets, but for strictly eye candy and the occasional extra rider having something to hold onto these work just fine. The shipping box was in great shape and all parts and bars were packed packed well. The one thing about Chinese products, is they are innovative on how they are able to fit everything into the boxes. It is pretty clever how they have bolts that comes with the front/rear brackets, but you also need to use some of the existing bolts. The six back screws and the six front screws took ten min to remove. The back bracket took ten min to install since all of the holes lined up. You will use the screws they provide since they are longer and go in beneath the bracket and you don’t see them and the two screw that fit in the middle you do see and you will use two that you took out since they are on top and need them to match other OEM screws.Now comes the front bracket. You use four of the original screws you removed (two on each side under the lid because you see the screw heads when unlucky open up the front storage even though it is the underside, and the two short screws that come with the brackets fit underneath in the center two holes, but since the honeycomb lid reinforcements hide them you won’t see the screws. Here is the trick to putting on the front bracket. If the holes don’t line up (and they probably won’t). You put in the two center screws that come with the kit 3/4 of the way, then put in the two OEM screws on the drivers side and tightened down so the four screws are finger right, then you get on the passenger side bracket and bend (push) the bracket while it is still on the Polaris. My bracket had to move maybe four inches. Trust me when I say you will open up a whole lotta headache by bending the bracket while it is off. The reason the back fit perfect was the angles are more squared, where the front is more curved. Although the metal is sturdy to hold onto once it is on the front, it is very easy to bend the sides while it is on the Polaris if you have the other four screws holding it in place. If you try to bend it while it is off, you will end up bending both sides and then only the front two screws fit, and you will then spend three times as much time tweaking. I would recommend this bracket if you want to sane money and know that most likely you will end up having to push on the side to get the holes to line up.
Jim
Reviewed in the United States on January 24, 2023
Installation was easy since product fit my 2018 Sportsman 570 without any problems. One piece design looks better than the multiple piece racks I searched before buying this. Instructions were easy to follow, need to read them thoroughly to avoid any issues. Instructions showed drilling might be necessary for the front rack, but my front cover had pre-drilled holes, no drilling required. Good value for the price.
Recommended Products
$232.23
$ 99 .00 $99.00
$199.99
$ 82 .99 $82.99