Your cart is empty.
Your cart is empty.Product Description
Our products are always inspected and commissioned before send out, but due to the transit, they may be scratched or parts may be deformed.
In such cases, the damaged part can be replaced. Thank you for your understanding in advance.
**Please note that it is better not to cut with gloves to avoid hand injury due to inflexible operation.
All drill chucks included with the current stock products are 0.6-6mm. If you want to change the size of 1.5-10mm, please let us know before place an order.
**Please note that it is better not to cut with gloves to avoid hand injury due to inflexible operation.
Failure elimination
If you get stuck during the work, please check it easily by the following method.
Make sure that the green lamp of the power supply stays on for a long time while the power is on. If it does not light or blinks, there is a problem with the power supply. If the machine is continuously used for a long time, the power cord will get hot. Normally, it is recommended to use for 30 to 40 mins and then stop for about 15 mins to cool.
Turn off the power and try rotating the motor shaft (the part that connects to the drill chuck) by hand. If you cannot rotate with your hands, the motor is defective. If the motor shaft can rotate without any problem, it is considered that the connection is poor due to wood chips mixed in the switch part.
(For above situations, please feel free to ask us for help.)
Installation of drill chuck
The specific steps of installing the drill chuck are shown in the figure above. When installing, please make sure that the drill chuck is firmly fixed.
Replace the saw blade
If you find that the saw blade keeps falling during use, it may be that the aluminum block in the device has slipped and needs to be replaced. We can provide free aluminum block accessories and videos on how to replace them for you to replace.
Adjust the lifting of the saw blade
The rotation direction of the saw blade and how to move it up and down are as shown in the figure above. When installing the saw blade, please pay attention to the direction of the saw blade, and do not install it upside down.
Alex
Reviewed in the United States on July 4, 2024
I don't know if there is a replacement for the motor. Leave a message if you have an idea.
Harlan R Russell III
Reviewed in the United States on May 21, 2023
Nice saw for building hobby small detail parts
James
Reviewed in the United States on November 3, 2023
I used the saw for about an hour. When I turned it on again, it didn't run.While using it, I noticed the following issues.- The chip clearance doesn't work well. I had to vacuum it out every few grooves.- The power cord sparks when plugged in, every time.- The wingnut on the fence prevents cutting grooves in anything taller than the fence, eg : > 1 cm.- The fence is often over the nut that is used to raise or lower the blade, so the height must be adjusted prior to the fence.
GABRIEL
Reviewed in Mexico on February 2, 2022
No se puede usar hasta que se cambie la clavija. La que trae el equipo no se puede utilizar en México.
Katherine & Robert
Reviewed in the United States on February 18, 2022
Purchased this to put a diamond wheel for sharpening engraving cutters. When it arrived the power supply was damaged in shipment, I contacted the seller and sent a photo they immediately sent a new power supply by FedEx it arrived in less than a week. The saw is very well built and works amazingly well. It cuts straight and true. The saw for being a mini saw is very well constructed and heavy duty for its size. The blade can be adjusted height and very handy. Can use any 4 1/2 inch blades easy to change. I 3D printed an adapter that I glued into the opening for a vacuum hose which eliminates all the dust. I can send a STL file if anyone wnats to print one. Overall an excellent saw for the money, My son fell in love with it and is ordering one also.
Susan Stollsteimer
Reviewed in the United States on April 10, 2022
I purchased a 5T Table saw two years ago. Decided to upgrade to the 6T Table saw.(Oh I love the upgrades) . The motor suffered infant failure. I contacted the contact at Huanyu and was treated with respect. Once he was able to See the failure (Cell Phones are great!), They immediately sent a new motor. could not ask for anything more.
Jack A. Coneybeer
Reviewed in the United States on August 3, 2020
Customer support replied very quickly when I contacted them. The saw is just what I was looking for. It's great for working on small jobs, and I feel much safer than when using my full size table saw. Plus, it is small enough that I can easily carry it to where I want to work.
N J Savage and James
Reviewed in the United States on December 22, 2020
Once I received all the parts and set up, the only problem I had was the unit would slide. If the feet were more 'grippy' that would solve the problem. I would also like to know if there is some sort of table extension. Some of my pieces are too wide to use the fence.Overall I am really enjoying the use - a perfect size for a 76 year old crafting lady.Thank you.,
Recommended Products